CAMBRIDGE EDGE NQ User Manual page 24

8. Your PC's output will now playback via the Edge NQ.
Mac Setup
1. Connect your EDGE NQ to your Mac.
Using a USB audio cable (Type A to Type B), connect the USB Audio In on your EDGE NQ to a USB port on the Mac.
Note: If using a Mac without a USB Type A port, you may also use USB Type C (Thunderbolt 3) to USB Type B connection.
2. Select the USB Audio source.
If using the front panel source selector of your EDGE NQ, switch to USB Audio.
If using the StreamMagic app, go to the Home tab, then select USB Audio within the Sources section.
3. Within the System Preferences of the Mac, locate the Sound settings. Select the CA Edge 2.0 as the output sound device.
24