Ring Mekanikk AS Instruction manual for equipment Steens Physical Introduction : This user manual for your lat-pulley is ment to guide you to the best use of the apparatus, and ensure that the patient safety is taken care of. This user manual is for: 1.
Page 3
_________________________________________________________________________________________ EC DECLARATION OF CONFORMITY FOR MACHINERY _________________________________________________________________________________________ Manufacturer: Ring Mekanikk AS Adress: Industriveien 10, 2390 Moelv, NORWAY Herewith declares that: Apparatus with number 180110-10,180110-20,180110-30 is in conformity with the provisions of the Machinery Directive(directive 89/392/EEC), as amended, and with national implementing legislation.
Ring Mekanikk AS Instruction manual for equipment Steens Physical User manual: Installation and unwrapping. Inspect the wrapping carefully when receiving the pulley, and if there are signs of damage, you must contact your forwarder immediately for damage claims. Do NOT remove straps on the pulleys weight stack, before you have placed the equipment where it is supposed to be used.
Ring Mekanikk AS Instruction manual for equipment Steens Physical D. Precautions: The pulley is only ment to be used for specific theraputic and training excercises, and with the additional equipment we have described. see page 8 and 9. Limitations: One must not push or pull the apparatus using the gliding rods, this can cause damage to the functioning of the gliding of weights.
Ring Mekanikk AS Instruction manual for equipment Steens Physical G. Area of use: The pulley is ment to be used for training or treatment in different categories. To get the best use of the apparatus, it should be used according to instructions from instructor or therapeut.
Page 7
Ring Mekanikk AS Instruction manual for equipment Steens Physical date: 24.08.2012 page 6...
Page 8
Ring Mekanikk AS Instruction manual for equipment Steens Physical date: 24.08.2012 page 7...
Page 9
Ring Mekanikk AS Instruction manual for equipment Steens Physical date: 24.08.2012 page 8...
Need help?
Do you have a question about the Steens Physical and is the answer not in the manual?
Questions and answers