Data Settings - Kyocera Slider Remix KX5 User Manual

You must first establish a second phone
Note:
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
Select
1. Menu Settings
.
Set Phone Line
Select one of the two lines and press
2.

Data Settings

Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
Select
1. Menu Settings
.
Com Port Speed
Select the speed. The options are:
2.
(default),
115.2 kbps
There may be a higher charge for
Note:
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
42
Network
.
Accessories
,
19.2 kbps
, and .
230.4 kbps Other
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
To purchase a cable, call 800-349-4188
Note:
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
Connect the phone to the laptop or PC.
1.
Set the Com speed.
2.
Select
3. Menu Settings
.
Data/Fax Calls
Press to select an option:
4.
– allows only voice calls.
Voice only
– , or
Fax next call
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
– , or
Fax until off
phone into fax mode or data mode until
the phone is turned off.
You cannot receive voice calls while the
Note:
phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note:
using the phone with a TTY device.
Connect the TTY device to the phone.
1.
Enter
2.
your keypad.
Press to select the
3.
.
Network
, sets the
Data next call
, forces the
Data until off
Enable TTY only when
from
option.
TTY
Customizing Your Phone