Summary of Contents for Gaide Intelligent Technology GD06
- Page 1 Changzhou Gaide Intelligent Technology Co.,Ltd Manual GD06 Ebike Intelligent Display...
- Page 2 Material&Dimension Material Caser and Cover and Press button: ABS, LCD window: PMMA Outside and mounting dimensions(mm)
- Page 3 Press button outside and mounting dimensions(mm) Installation ●Install the display in the middle of handlebar, then adjust to suitable angle, install the press button to left side ofhandlebar. ●Power off the device, connect the device to controller. ●Power on...
- Page 4 2. Overview of GD06 UART protocol: Equipped with independent press buttons Speed： Real-time SPEED kmh/mile： Kmh/MPH according to habit Battery level： Indicates the battery level in real time Head light control： Press button to power on/off Back light adjustment： 3-level adjustment 7) Assist level：...
- Page 5 Distance： Trip/ODO 8) Driving Duration Error code： “ERROR” and code when there is error 4. Press button definition GD06 uses independent press button, in total threebuttons: “UP” 、 “MODE” 、 “DOWN” 。...
- Page 6 5. Operation instructions Power ON/OFF （ MODE） during 3 When the power is off, Long press seconds ， screen will display all contents and start to normal working mode, and controller will be turned on When the power is （ MODE） during 3 seconds， screen will on, Long press be powered off，...
-
Page 7: Parameter Setting
4)Assist level Short press to change assist level， default value is level 1 5) Head light control Long press for 3 seconds turn on/off the head light。 6) 6km mode When the bike is stopped, long press , will enter 6km/h mode, the speed will be 4.5~7.5km/h according to different road conditions, WALK “... - Page 8 value and switch to next parameter. P01-back light lightness： short press will switch from 1 to 3,Level 3 is lightest. Level 2 is default value. P02-kmh/MPH： Short press to Switch kmh/MPH. P03-Working voltage： short press to switch 24V,36V,48V. P04-Auto shutdown time: short press to switch from 0 to 60, it is the time(in minutes) to shut down the screen automatically if no...
- Page 9 inch,20 inch,22 inch,24 inch,26 inch,700C,28 inch. P07-Number of magnets for speed sensor： short press to switch fromt 1 to 15. P08-speed limit： short press to set the speed limit from 10 to 41km/h. This feature is reserved: display P09, invalid. This feature is reserved: display P10, invalid.
-
Page 10: Specifications
4) Leakage current after power off: <1uA 5) Current supply to controller:50mA 6) Working Temperature： -10~60℃ Storage temperature： -20~70℃ 8. Error code definition When an error appears, GD06 will notice users by different codes, please refer to table 1 for different codes:... - Page 11 Code (Decimal) Signification Normal Low Battery level Communication failure current sensor fault Throttle failure Failure of motor phase line Motor hall failure Brake abnormity Table 9. Notices Power on and power off must keep an interval of at least 3 seconds, please don’t press “...
-
Page 12: Warranty
A： Find a nearest shop to get repair 11. Warranty 1 year of warranty for quality issue except frame is broken. 12. Version This is a universal manual for GD06.It could be customized by each client. Please confirm all details before purchasing.