Setting An Alert For Roaming - Kyocera Phantom KE413 User Manual

– Analog only sets the phone to work in analog mode only.
– Analog call forces a call into analog mode for the duration of the next call.
– Digital only sets the phone to work in digital mode only.

Setting an alert for roaming

Depending on services available from your service provider, you may use
this setting if you want the phone to alert you when you roam outside of
your home service area.
1. Select Menu → Settings → Network → Roam/Svc Alert.
2. Select an option and press
– When no svc alerts you with three tones decreasing in pitch when
service is lost and three tones increasing in pitch when service is
acquired again.
– Roam Change alerts you with two decreasing tones when roaming
service is acquired and three increasing tones when home area
service is acquired again.
– Any Change alerts you with three increasing tones if there is a change in
roaming service or three decreasing tones if the phone loses service.
User Guide for the Kyocera Phantom phone
.
25