Stirling STR-H48W Quick Start Manual

A

Installation

CAUTION! The fridge is heavy - transport it with care! To avoid back or other injury,
we recommend you ask someone for help or use a mechanical aid when moving it.

Getting it ready for use

1
Before you start installing the fridge, wipe the interior surfaces and accessories with
a well wrung out cloth moistened with lukewarm water and a mild detergent. This will
remove any dust from transit and storage and help remove the typical smell of a brand
new product. Dry thoroughly.

Need the doors reversed?

2
Your new bar fridge has the capability of the door opening from the right or left side.
If your set-up requires reversal of the door swing, please follow the instructions on
pages 18-19 of the supplied manual.

Where to install

3
The fridge is designed for freestanding use. The floor must be strong, sturdy and
level — adjust the levelling feet, if necessary. Avoid areas where the fridge would be
exposed to direct sunlight, heat, extreme cold ambient temperatures or excessive
moisture and high humidity. Installing it in the coolest area of the room will save energy
consumption and running costs. Allow at least 12cm clear space at the back and 5cm
at the sides so air can circulate freely around the fridge.
For comprehensive installation instructions, please consult the manual.
Before plugging in your new bar fridge, let it stand upright for a few hours to allow
Plug in the fridge and secure the power supply cord behind the unit, making sure
Quick Start Guide
the refrigerant gases to settle into the compressor.
When first starting up, and after a period out of use, allow the unit
to cool down on the coldest setting (5) for at least 2 hours before
Let's get your new
48L bar fridge ready to use!
Connection

Power connection

the plug is accessible after installation.
placing perishable food in the fridge.
Nearly done! Just a bit more on
the other side of this page...
Model: STR-H48W
B

Settling

4
5

Cool down

6