Harmotech DESIGN TinyAMP TA-440 Instruction Manual

Harmotech DESIGN TinyAMP TA-440 Instruction Manual

Ultra compact speaker with amp

Advertisement

Ultra Compact Speaker with Amp

◆Specifications

◦Dimensions: H149xW55xD44 ㎜ Weight:100g
◦Tone changeover switch(DRIVE/CLEAN)
◦USB rechargeable (USB microB terminal)

◆Included items

◦TinyAMP    ◦USB Cable (microB)

◆Explanation of each part

ON
USB terminal for charging
Charge by connecting to a power adapter
for smartphones with a micro USB cable.

◆Precautions for use

●Please plug the main unit into your instrument and then turn on the
 power switch.
 If you plug in your instrument with the power switch turned on,
 turned on, a loud noise may occur or the power may be turned off.
●A loud input may turn off the power.
 In that case, turn the switch off and then on again.
●If static electricity flies to the tip of the plug, it may cause a malfunction.
 Be sure to hold the main body when carrying it, and do not touch the plug.
●Do not drop, hit with something or give strong shock to the product.
 (If there are cracks or damage on the appearance, discontinue use.)
●Turn off the power switch while charging.
 Leaving the power switch on will accelerate the deterioration of
 the built-in battery.
●If the main body swells, stop using it immediately.
※1.Based on continuous operation evaluation at eighth note tempo 180
(When using CLEAN mode) and metronome voice mode at
maximum note by using ALESIS SAMPLE PAD PRO.
Note ・ The operating time varies depending on the conditions.
Instruction Manual
Power switch
OFF
Body
Φ6.35mm plug
Connect to your instrument
with this plug.
Manufacturer
HarmoTECH Co., LTD.
125 Daikumachi, Naka-ku, Hamamatsu,
Shizuoka, Japan 430-0936
Thank you for purchasing the TinyAMP TA-440.
Please be sure to read this instruction manual before use to maximize
the performance of the product and to operate it safely.
Also, please keep it on hand for reference at any time.
◦Speaker output: 4W
◦Φ6.35mm standard plug (monaural)
* Charging time (empty to full): Approximately 1 hour and 30 minutes
* Continuous operation time :Approximately 6 hours※1
Speaker
Tone changeover switch
TinyAMP's DRIVE sound is an overdrive with pure
analog circuitry.
You can enjoy a smooth change in distortion with
respect to the volume change of the guitar body.
Status LED
Green light:
Red light:
O f f :
DRIVE
CLEAN
Power on
Charging 
* Turns off when charging is complete.
Power off (or charging complete)
※Product design, specifications, appearance,
and price may change without notice.
We kindly ask for your understanding.
-Contact us -    
Mail. info@harmotech.co.jp
URL. www.harmotech.co.jp

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TinyAMP TA-440 and is the answer not in the manual?

Questions and answers

Summary of Contents for Harmotech DESIGN TinyAMP TA-440

  • Page 1 Thank you for purchasing the TinyAMP TA-440. Ultra Compact Speaker with Amp Please be sure to read this instruction manual before use to maximize the performance of the product and to operate it safely. Instruction Manual Also, please keep it on hand for reference at any time.
  • Page 2 ■Precautions for use       Please observe the following to prevent the product failure or damage.       Precautions regarding product handling / care ・Do not use near other electric appliances such as TVs, radios, stereos, and mobile phones.It may cause noise on the TA-440, TV, radio, etc. ・Do not use in places exposed to direct sunlight (inside a car during the day, etc.), places with extremely high temperatures such as near a stove,  places with extremely low temperatures, or places with a lot of dust or vibration. It may cause deformation of the panel of the main body,       failure of internal parts, or unstable operation. ・Do not place vinyl products, plastic products, rubber products, etc. on this device. It may cause discoloration / deterioration of the body. ・When cleaning, use a soft, and dry cloth. Do not use benzine, thinner, detergent, chemical elephant, etc. as they may cause discoloration /       deterioration. ・If there is a risk of condensation on the body, leave it for several hours without turning on the power and use it after the condensation       disappears.  ・If you give an impact to the tip of the plug or static electricity runs on it, it may cause a malfunction. When carrying it, hold the main body and       do not hit the plug. ・To prevent speaker failure, turn on the power of this unit last when turning on the power. Also, when turning off the power, first turn off       the power of the device. ・Be sure to turn off the power switch after use. ■Safety precautions     Never fail to observe. Always follow the basic precautions listed below to avoid  About symbol display the possibility of physical injury to you or others, or damage to  The symbols displayed on this product and in the owner's manual the device or other property.  have the following meanings. Please keep this manual in a safe place for future reference.      Symbol to show attention About "WARNING" and "CAUTION" The contents that are expected to occur if mishandled are listed     Symbols to indicate prohibition according to the magnitude of harm or damage and the degree  of urgency.    Symbols to indicate actions     Always follow the basic precautions to avoid   the possibility of serious injury or even death. WARNING ...

Table of Contents