H+1 AFINIA 3D Quick Start Manual

G. WARNINGS

G. Warnings
WARNING: This 3D Printer - when used with styrene
filament (ABS / HIPS / PC-ABS) - can expose you and
others in the same room to styrene, a chemical known
to the State of California to cause cancer.
www.P65Warnings.ca.gov
ALWAYS OPERATE THIS PRODUCT IN A
WELL-VENTILATED AREA.
WARNING, HOT SURFACES!
Extruder and build platform can reach very high temperatures.
WARNING! Fast moving parts. Tie back loose hair, secure
loose clothing and keep all printer doors closed during
operation.
Do not leave the printer unattended during operation. Watch
to make sure the first few layers adhere correctly.

H. Printer Description

Touchscreen
USB Port
Front Door
Dual Filters
Build Platform
Waste Tray
[ F ron t ]
[Righ t ]
[B ack ]
Top Lid
Right Side Handle
Filament Bay
Power Switch
Ethernet Socket
USB Port
Power Socket

Technical Support:
Email: support@afinia.com
USA Phone: 952-279-2643
Japan Phone: 03-3561-2266
www.afinia.com
Afinia 3D
8150 Mallory Court
Chanhassen, MN 55346, USA
Tel: +1 888-215-3966
Quick Start Guid e
For full user manual,
visit www.afinia.com/support/manuals-guides/
