1. Overview 7IP1250 high voltage regulated power supply is specially designed for supporting the photomultiplier tube. 2. Features Adjustable high voltage output up to -1250V High stable output The output can be adjusted manually or by external voltage Three and a half LCD voltage display Separate high voltage start button, enhance the safety of personal and equipment.
Page 4
5) Input adjustment rate: ±0.1% Max. 6) Preheating time: ≦ 30 min 7) High voltage start time: 200ms Typ. 8) Operating temperature: + 5 ~ + 40 ℃ 9) Storage temperature: - 5 ~ + 50 ℃ 10) Output adjustment mode: a) Local adjustment: Knob b) External adjustment: 0 ~ + 5 VDC 11) Output voltage display: Three and a half LCD...
Page 5
through the BNC input plug. d) HV Adj: It’s used to control output voltage manually. The output voltage will increase when turning clockwise, and please lock it after adjusting to avoid accidental change of high voltage output. e) (0V to 5V) Remote In: BNC plug for external adjustment of input voltage.
Page 6
e) When the Control Switch is pressed, it is for external control adjustment. At this time, 0-5V DC voltage can be input through the remote plug to control the output high voltage. It is best to connect the earth wire to protect the safety of equipment and operators.