Advertisement
Quick Links
1 - PROGRAMMING DESCRIPTION
2 - INSTALLATION
3 - PROGRAMMING
4 - FUNCTIONS
5- WiFi SERVER COMMANDS
6 - PASSWORD
7 - CLOCK
8 - PARAMETERS
9 - KEYFOB
- System operation
- Keyfob registration procedure
- Keyfob cloning procedure
- Battery replacement
10 - CHARACTERISTICS DATA
11 - WARRANTY
12 - SWITCH PARAMETERS READ WRITE
13 - ANDROID SMARTPHONE APP SCREEN SEQUENCES
SMART SW
Advertisement
Summary of Contents for LOREN CONTROLS SMART SW
- Page 1 SMART SW 1 - PROGRAMMING DESCRIPTION 2 - INSTALLATION 3 - PROGRAMMING 4 - FUNCTIONS 5- WiFi SERVER COMMANDS 6 - PASSWORD 7 - CLOCK 8 - PARAMETERS 9 - KEYFOB - System operation - Keyfob registration procedure - Keyfob cloning procedure...
-
Page 2: Installation
Warning! Work on electrical connection only after the supply voltage has been switched off. Smart Sw enclosure is suitable to be installed inside electrical junction boxes, electronic devices or to be fixed on wall. To access the 10A model terminal blocks remove the 4 screws which hold the 2 orange protection covers. - Page 3 1 - 250 Impulse duration (s). 13 LED MODE 0 - 5 Smart Sw led signalling mode: 0= led always on according to the raly state (ON = red, OFF = green), * 1= led flash to signal a relay state change: (OFF->ON) = red flash, (ON->OFF) = green flash,...
- Page 4 (green=ON e red=OFF). With COMMAND MODE=2 a single push of a shows present state of the Smart Sw (green=ON e red=OFF), to change present state, the button has to be pressed a second time while the led indicating present state is still on.
-
Page 5: Warranty
Reposition the PCB in the half shell which has 2 pins making sure the battery side face down, close the shell and screw the 2 previously removed screws. CHARACTERISTICS DATA SMART SW 80 — 240 VAC Power supply 50/60Hz... - Page 6 3- Push the ”Start NFC Connection” button, under the “Loren Controls” logo. 4- Like asked by message on the screen, place the phone on top of the Smart Sw enclosure where the NFC symbol is. 5- If the connection is activated, another screen will appear, showing Software/Hardware data and 2 buttons.
- Page 7 “ Start NFC Connection Start NFC Connection > SET_UP MENU First image of the App” Start NFC Connection > SET UP MENU Start NFC Connection > SET UP MENU Start NFC Connection > SET UP MENU > Select Switch Type >...
- Page 8 Start NFC Connection > SET UP MENU Start NFC Connection >SET UP MENU > Change Password Start NFC Connection > SET UP MENU > weekly schedule > Daily schedule > Clock Adjust Start NFC Connection > SET UP MENU Start NFC Connection > SET UP MENU >...