Summary of Contents for SZFATEC CR-100
- Page 1 USER MANUAL SZFATEC DNG-250, FA-150 and CR-100 MULTI-FUNCTION CHAMFER MACHINES...
-
Page 2: Main Parts Description
1. Air pressure indicator 2. Assistant jig-holder 3. Lock button 4. Start button 5. Air nozzle FA-150 chamfer for straight CR-100 chamfer for round/corner 6. Touch switcher (handle) 7. Air nozzle 8. Position indicator 9. 5mm big screw 10. 1.5mm inner hexagon screw 11. - Page 3 How to use FA-150? Way-1: Use FA-150 directly o peration steps 1. Connect the air compressor and FA-150 chamfer directly with the supplied tubes; 2. Please make sure the air pressure is more than 5kgs (in the air pressure, there should be an indicator/pointer to tell you the current pressure);...
- Page 4 How to use RC-100? Way-1: Use RC-100 directly o peration steps 1. Connect the air compressor and RC-100 chamfer directly with the supplied tubes; 2. Please make sure the air pressure is more than 5kgs (in the air pressure, there should be an indicator/pointer to tell you the current pressure);...
- Page 5 2. Then the chamfer loosens, you can turn the indicator ring and adjust the up-down position of the blades. Continues - How to replace CR-100 blades: 3. Take off the round assistant plates from the assistant jig (handle); Take off /re-joint the round assistant plates 4.
-
Page 6: Main Parameters
FA-150 technical data Brand: SZFATEC Product: Pneumatic edge chamfering machine (for straight edges) Model: FA-150 Application range: Metalworking industry Main parameters Blade quantity: 3 pieces (originally attached) Machine size: W205 x D101 x H119 mm Worktable diameter: 150mm Applicable blade type:... - Page 7 CR-100 technical data Brand: SZFATEC Product: Pneumatic edge chamfering machine (for round angel/corner) Model: CR-100 Application range: Metalworking industry Main parameters Blade quantity: 3 pieces (originally attached) Machine size: W100 X D180 XH90 mm Worktable diameter: 150mm Applicable blade type:...
-
Page 8: Product Characters
Product characters: ● The curve parts of steel can be chamfered with simple and smooth operations; ● The inner and outer flange areas can be chamfered; ● The attached gauge can adjust the chamfering degree correctly; ● The angle of the bevel can be adjusted in the range of 15°-45° ; ●...
Need help?
Do you have a question about the CR-100 and is the answer not in the manual?
Questions and answers