Page 1
ROOFTOP DECK - PROMASTER INSTRUCTION MANUAL Thank you for purchasing the Van Cafe Rooftop Deck for the ProMaster van. The key to a good camper van is function and storage and the Rooftop Deck offers both. Bring your kayak, mount your rocket box, attach your bike rack or ski rack – pretty much whatever you can think of, the Rooftop Deck can handle it.
PROMASTER VAN FITMENT RAM PROMASTER THIS ROOFTOP DECK IS DESIGNED FOR 2014-2022 Ram promasters 2014-2022 136in Wheelbase High Roof 159in Wheelbase High Roof 159in Wheelbase Extended High Roof ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 6...
Align block level to the ground and parallel with body lines *Refer to diagram to see which ‘T-bolts’ on the van are used ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 7...
INSTALLATION STEP Install supplied pads onto bottom of Roof Block Drop Roof Block over the top of each T-Block ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 8...
4mm allen wrench Tighten bolts down keeping riser blocks aligned with body and level to the ground *Van roofs are not perfect, align blocks as straight as possible before tightening down ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 9...
Using 10mm wrench, slide flange nut into end of lower assembly Thread screw with a drop of Loctite through blocks and into the nut Tighten with 5mm allen wrench and 10mm wrench ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 10...
Riser Block, thread in the other screw through the Riser Block Leave 8in T-Nut loose on Risers Move around the van and install the remainder of Riser assemblies ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 11...
53-7/8" 53-7/8" 53-7/8" front of van front of van front of van 136in Wheelbase 159in Wheelbase 159in Wheelbase Ext 213in Overall Length 236in Overall Length 250in Overall Length ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 12...
With the front ‘I’ section installed, tighten down with a 5mm allen wrench Following the diagram, install the rest of the extruded aluminum track ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 13...
Following the instructions for the corner kit, assemble the corners and install on front and rear sections of extruded aluminum track. *All ProMaster wheelbases use the “F” (53- 7/8”) piece of extruded aluminum *Keep T-nuts loose enough to slide into ex- truded aluminum track...
*We’ve measured up to a 1/2in variation in where the factory T-Bolts are located from side-to-side *Our rack is designed to be adjustable enough to make it work ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 15...
Move to the other side and repeat *Leave it a little loose until all components are installed ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 16...
FINISHED! That’s it, you’re all done!! Now it’s time to fill your Rooftop Deck up with all the cool stuff; Planks, Deck Boards, Filler Panels...etc ROOFTOP DECK - PROMASTER Installation questions? Email support@vancafe.com page | 17...