Page 3
The product and text described in this document are under constant development and refinement. ODOT Automation System Co., Ltd. has the right to modify this document without notifying users.
1.Product Overview 1.1 Product Introduction ODOT-MS105T/108T/116T is a series of plug and play, industrial grade non-management Ethernet switch with 5/8/16 100Mbps ports, all of which support 10/100Mbps auto-negotiation (MDI/MDIX), IEEE 802.3/802.3U / 802.3X, Auto-MDI /MDIX and broadcast storm protection. The switch operating temperature range is -20 ° C to 70 ° C, and it could be applied to a variety of industrial environments with standard 35mm DIN rail installation, and its protection level is IP20.
Power 2 input negative Power 2 input positive Earthing Power 1 input negative Power 1 input positive 2.4 LED indicator description 1. Power LED Table 2.4.1 ODOT-MS105T/108T LED instruction Marking Status Definition Power supply is normal ON (RED) Power supply is abnormal OFF(RED) Table 2.4.2 ODOT-MS116T LED instruction...
Page 10
PWR2 Power supply 2 is normal ON (RED) Power supply 2 is OFF(RED) abnormal 2. Network port indicator LED (5 口) (8 port) Link/Act:Link Status indication, Active: Active indicator ON:Link UP OFF:Link DOWN Flash:Active SHIELD:RJ45 Plug shield interface http:// www.odotautomation.com TEL: +86-0816-2538289 10 / 15...
Page 11
(16 port) Speed:Network speed indicator light (multi-color) Green on:100Mbps Green off:10Mbps Link/Act:Link Status indication, Active indicator ON:Link UP OFF:Link DOWN Flash:Active SHIELD:RJ45 Plug shield interface http:// www.odotautomation.com TEL: +86-0816-2538289 11 / 15...
Table 2.5.3 ODOT-MS116T Installation size 3. Troubleshooting (1) The "PWR" LED is off, please check whether the switch power supply is normal; (2)Insert the cable, but the LED on the Ethernet port is not on. Please check whether the plug at both ends of the cable have been firmly inserted and whether the cable is damaged.