legasy 5KWH-A161 User Manual

Wall energy lithiumstorage system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

USER MANUAL

FOR WALL ENERGY LITHIUM STORAGE SYSTEM

MODEL: LEGACY-5KW/10KW

VOLTAGE: 48V/51.2V

Table of Contents

Need help?

Do you have a question about the 5KWH-A161 and is the answer not in the manual?

Questions and answers

Summary of Contents for legasy 5KWH-A161

Page 1 USER MANUAL FOR WALL ENERGY LITHIUM STORAGE SYSTEM MODEL: LEGACY-5KW/10KW VOLTAGE: 48V/51.2V...
Page 2: Table Of Contents
www.connectinglegacy.com Version: 1.0 Contents 1. Safety Precautions .................................- 2 - Before Connecting ................................- 2 - 1.1. During operation ................................- 2 - 1.2. 2. Battery Specifications ................................- 3 - 3. Introduction to the Series battery ............................- 4 - Key Features ..................................- 4 - 3.1.
Page 3: Safety Precautions
www.connectinglegacy.com 1.Safety Precautions  It is very important and necessary to read the user manual carefully before installing or using the battery. Failure to follow any of the instructions or warnings in this document can result in electrical shock, serious injury, death, or may damage the battery and the whole system. ...
Page 4: Battery Specifications
2.Battery Specifications Battery Specifications Model No 5KWH-A161 10KWH-A162 Nominal Parameters Voltage 48V/51.2V 48V/51.2V Capacity 100Ah 200Ah Energy 4.8KwH/51.2KwH 9.6 KwH/10.24Kwh Dimensions (L x W x H) 680 x480 x180(220)mm 680x480x180(220)mm Weight 55kg/58kg 90kg/95kg Basic Parameters Life time(25°C) 10 years Life cycles(80% DOD, 25°C)
Page 5: Introduction To The Series Battery
www.connectinglegacy.com 3.Introduction to the Series battery 3.1.Key Features  LiFePO4 composition – provides exceptional safety and longevity  High safety and reliability  6,000cycles/10 year service life  Consistent performance over wide temperature range  Wall-mounted, convenient installation  Integrated state-of-the-art BMS to manage and monitor battery information including voltage, current and temperature as well as balance cell charging/discharging rates ...
Page 6: Soc Indicator & Status Indicator Guides
www.connectinglegacy.com RS232 Port RS232 communication port 8 RS232 RS485B port RS485 parallel communication interface 9 RS485 Operation indicator 10 LED RUN Alarm indicator 11 LED ALM Capacity indicator 12 LED CAPACITY 13 LCD   LCD Key 14   15 switch ...
Page 7: Connectors
www.connectinglegacy.com 3.4.Connectors Charge / Discharge connectors: to connect the positive pole (+) and negative pole (-) from the battery to the inverter via DC isolator. RS485: Active communication portal between battery and inverter. USB To RS232: to get dynamic monitoring data of the battery from upper computer. Address: Reserved Address portal for multiple parallel connections.
Page 8 www.connectinglegacy.com 3.6.3.Functional Specifications  Interface introduction  Main menu page  Electricity/dormancy activated, will show the welcome screen, press the MENU button to enter the main menu page. As shown in the figure below：  Battery parameters collection page When the cursor“》”is point to “Battery Parameters Acquisition”，press ENTER key will enter into the page of“Battery Parameters Acquisition”，As shown in the figure below：...
Page 9: Safe Handling Guide
www.connectinglegacy.com  Parameter Settings Screen can not set parameters  System Settings Page Baud Rate：9600 do not set  Key description 1) SW1----NEMU，SW2----ENTER，SW3----UP，SW4----DOWN， SW5----ESC. 2) Each item is “》”or“--”as a beginning，among them“》”shows the current cursor position， press UP or DOWN key can move the cursor position；with“》”end of the project，the content of the said project has not shown, press ENTER key can enter the corresponding page.
Page 10: Safety Gear
www.connectinglegacy.com Tools The following tools are required to install the battery pack:  Wire cutter  Crimping Modular Plier  Screw Driver Note: Use properly insulated tools to prevent accidental electric shock or short circuits. If insulated tools are not available, cover the entire exposed metal surfaces of the available tools, except their tips, with electrical tape.
Page 11 www.connectinglegacy.com  The installation site must be suitable for the size and weight of the battery.  Must be installed on a firm surface to sustain the weight of battery.  The area is water proof.  There are no flammable or explosive materials in proximity ...
Page 12: Installing The Battery Pack
www.connectinglegacy.com 5.3.Installing the Battery Pack 5.3.1.Mounting to a wall WARNING In order to avoid electrical shock or other injury, inspect existing electronic or plumbing installations before drilling holes. The battery is heavy, please handle with care to avoid damage to the product or injury to the installer. 1.Choose suitable firm wall with thickness greater than 80mm.
Page 13: Communication
www.connectinglegacy.com 5.4.1.Power connection Let’s take 4 batteries for example, use an additional junction box (not included in the standard pack) to combine the power flow of both batteries: ombiner box 7.Please refer to the figure below to connect the positive output line A.C.E.G. of the battery terminal and the negative output line B.D.F.H of the battery terminal.
Page 14: How To Connect Inverter
www.connectinglegacy.com 6.2.How To Connect Inverter 6.2.1.The communication PIN of battery and the inverter: Battery Pack Inverter Pin1 Pin1 Pin2 Pin2 Pin3 Pin3 Pin4 CANH Pin4 CANH Pin5 CANL Pin5 CANL Pin6 Pin6 Pin7 Pin7 Pin8 Pin8 6.2.2.Dial settings of battery ADS address: - 13 -...
Page 15 www.connectinglegacy.com 6.2.3.How to connect Deye inverter: ONE SET OF BATTERY: TWO SETS OF BATTERIES: THREE SETS OF BATTERIES: Four SETS OF BATTERIES: - 14 -...
Page 16 www.connectinglegacy.com 6.2.3.1 The communication setting steps of the inverter: 1)Click on “Setting” on the lcd: 2) Click on “Battery setting”，select “Lithium” as the battery mode: - 15 -...
Page 17 www.connectinglegacy.com 3)Lithium mode select: 00: 4)After lithium mode connected successfully, BMS will upload the data as below: 6.2.4 How To Connect Growatt Inverter 1 “Canbus” communication setting of the inverter: 6.2.4. ONE SET OF BATTERY: TWO SETS OF BATTERIES: - 16 -...
Page 18 www.connectinglegacy.com THREE SETS OF BATTERIES: Four SETS OF BATTERIES: 6.2.4.1.1 Can-bus communication setting steps of the inverter: 1 )LCD setting as below: - 17 -...
Page 19 www.connectinglegacy.com 2) Click on “Battery setting”，select “Lithium” as battery mode: 3)Click on “Enter” and “Down/Up” to select “36” and “L52”: 4) Click on “ESC”, and wait till the connection done. - 18 -...
Page 20 www.connectinglegacy.com “ ” communication setting of the inverter: 6.2.4.2 RS485 ONE SET OF BATTERY: TWO SETS OF BATTERIES: THREE SETS OF BATTERIES: Four SETS OF BATTERIES: - 19 -...
Page 21 www.connectinglegacy.com 6.2.4.2.1 “RS485” communication setting steps of the inverter: 1) Lcd setting as below: 2) Click on “Enter” and “Down/Up” to select “05 “ and “LI”（Lithium mode）: 3) Click on “Enter” and “Down/Up” to select “36” and “L04”: - 20 -...
Page 22: Abnormal Situation Handling
www.connectinglegacy.com 4) Click on “Esc”, and wait till the connection done. 7.Abnormal situation handling Fault phenomenon Cause of issue Approach Check if the AC input switch is closed Inverter cannot be turned on AC input failure Check if the line is open Whether the device is turned on Is the PC software used correctly? Abnormal communication...
Page 23: Product Responsibilities And Consulting
www.connectinglegacy.com 8. Product Responsibilities and Consulting 1) We will not be liable for the accidents resulting from operation breaking this specification and user manual. 2) We will not send separate notice, provided that the contents of this specification are changed due to improvement of product quality or technological upgrading;...

This manual is also suitable for:

10kwh-a162 Legacy-5kw Legacy-10kw