Functional Inspection; Placement Of Onewayslide; Using Onewayslide; Material - Handicare OneWaySlide Quick Start Manual

Functional inspection

Placement of OneWaySlide

Using OneWaySlide

Material:

Polyester, polyamide, cotton

Care of the product:

Read the product label.
Test OneWaySlide's friction by rolling it and noting how easily it glides. Check to ensure that it
resists movement in the opposite direction. If possible, compare with a new OneWaySlide.
Check to ensure that the OneWaySlide lies securely on the seat cushion. A rough mate-
rial on the top of the seat cushion gives the best result.
Place the OneWaySlide as indicated by the arrow on the product label and allow it to
hang about 10 cm over the front edge of the cushion.
NOTE! Place OneWaySlide according to instructions on product label. Incorrect place-
ment may entail a risk of the patient sliding out of the chair.
Size
2069
2070
If the patient slides forward in the wheelchair, the caregiver
can help them to lean forward and provide counter pressure,
thereby enabling the patient to slide back in the chair.
Make sure the knees are raised to the same level as the hips.
This can be done with the aid of a FootStool.
50 x 40
50 x 45
Do not use rinsing agent. To en-
sure maximum material life, hang
dry or tumble dry on low heat.