Do you have a question about the TC-500 and is the answer not in the manual?
Questions and answers
Summary of Contents for TruckCraft TC-500
Page 1
Proudly built in the USA Owner’s Manual TC-500 & 501 Flat Deck TruckCraft Corporation Chambersburg, PA 1-800-755-3867 Rev 10/2018 Copyright 2018...
TC-500/501 Flatbed Web: www.truckcraft.com TruckCraft Warranty Registration Thank you for purchasing a TruckCraft TC-500/501 Flatbed. We ap- preciate your business and trust that your New Flatbed will give you many years of outstanding service. To provide you with the superior sup-...
OR PROMISE ON BEHALF OF TRUCKCRAFT, OR TO ALTER OR MODIFY THE TERMS OR LIMITATIONS OF THIS WARRANTY. WHO BENEFITS FROM THIS WARRANTY? TruckCraft obligation under this warranty applies to the first purchaser of the product. Copyright 2018 TruckCraft Corporation Rev. 10/2018...
Page 5
All repairs must be authorized by TruckCraft prior to any work being completed. If after inspection Truck- Craft determines the product is defective in material or workmanship as claimed, TruckCraft shall have the option to repair or replace the defected item.
Page 6
TruckCraft’s obligations are limited to those expressed in this warranty and TruckCraft shall not be liable to the purchaser or any third party for any direct or indirect, incidental or consequential damage or loss. Some states do...
1.25” thick with 4” stringers. Optional 6” “C” or 7” “H” stringers are available for the STD. TC-500/501 flatbed. For the Extra H/D TC-501 flatbed with 2.38” thick floor planks the structural capacity will be (350lb/SF) with a 7” “H” beam or optional 6”...
(Spacer not supplied by TruckCraft) 3. Locate the cured dried wood spacer or UHMW polyethylene material (spacer not supplied by TruckCraft) between the top of the truck frame and the bottom of the flat- bed deck. 4. Locate the mounting channels on the side of the truck and drill holes as required for the mounting bolts.
Optional Product Components 20” X 20” TRAP DOOR AVAILABLE IN 6”, 12”,18”, 24”, 30” & 40” HIGH DROP IN RACK-SIDE SETS D-RING SWIVEL MOUNT STD. CAB-GUARDS STEEL BUMPER FOR PINTLE HITCH DROP SIDE TAILGATE MOUNTING Copyright 2018 TruckCraft Corporation Rev. 10/2018...
Need help?
Do you have a question about the TC-500 and is the answer not in the manual?
Questions and answers