Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for RHINO RH-WLD2021
-
Page 3: Set Up Router
Set Up Router Please keep network available 2.4GHz 5GHz The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. - Page 4 Water Leak Detector Instructions Parameter: Input voltage：DC3V AAA*2 Model Number:RH-WLD2021 Quiescent current：≤35uA Alarm curren：≤125mA Low-Voltage Indication：≤2.2V WiFi： 802.11b/g/n Detection method：water sensor detection Installation method：Mount on the ground Working temperature：-10-50℃ Working humidity：up to 95%RH Long press the reset button with the Needle...
-
Page 5: Ready To Work
Ready to work Manually add Wi-Fi devices in EZ mode Step1:Long press the reset button with the needle and hold for 5 seconds. Step2:Let the red Light Flash(rapid blink) • Red light rapid blink : Pairing mode to Connect WiFi. -
Page 6: Customer Support
lnstall Free App Download APP: scan the QR code below to download and install. Register and login: open the "MySmartH" APP to register and login according to the prompts. Customer Support... - Page 7 Two pairing modes are provided in the MySmartH app. The Wi- Fi Easy Connect (EZ) mode is the default mode, and the access point (AP) mode is the compatible mode. The user can tap the pairing mode drop-down list in the top-right corner of the page to switch between the pairing modes.
- Page 8 3. Choose WiFi and enter password and tap “Next”; 4. Confirm that the red indicator light of the water leak dtetctor is flashing quickly and tap"Next";...
- Page 9 5. Tap “Done”;...
- Page 10 Now your Water Leak Detector is successfully added to MySmartH app.
- Page 11 Manually add Wi-Fi devices in AP mode If the connection fails, please try AP mode If a dual-band network that supports both 2.4 GHz and 5 GHz bands is used, the AP mode can be used to add devices. In AP mode, follow the instructions to enable the indicator to blink slowly, select Confirm the indicator is blinking slowly, and then tap Next.
- Page 12 Ready to work Manually add Wi-Fi devices in AP mode Step1:Long press the reset button with the needle and hold for 5 seconds. Step2:Let the red Light Flash(blink slowly),If the indicator light of the Water Leak Detector is flashing fast, please continue to press and hold the reset button until the fast flashing turns to slow flashing.
- Page 13 Manually add Wi-Fi devices in AP mode 1. Open "MySmartH" APP, press the'+' in the upper right comer of the main screen; 2. Choose "Water Meter Monitoring"、click "Water Leak Dtetctor”.
- Page 14 3. Choose WiFi and enter password and Tap “Next”; 4. Tap"AP Mode"in upper right screen;...
- Page 15 5. Tap “Next”; 6. Click"SmartLife-1DD4"; In AP mode, on the Wi-Fi setting page of the mobile phone, find the Wi-Fi hotspot starting with SmartLife.
- Page 16 7.Tap the Wi-Fi hotspot to connect the mobile phone to it. 8.After a successful connection, go back to the app to start pairing.
- Page 17 The device pairing page on the app appears again and the pairing process continues. 9. Tap “Done”...
- Page 18 Now your Water Leak Detector is successfully added to MySmartH app.
Need help?
Do you have a question about the RH-WLD2021 and is the answer not in the manual?
Questions and answers