kENDALL TI-84 Plus Manual

Calculator Notes for the TI-84 Plus
Note: Entering Lists
There are six pre-set lists in the calculator: lists
other named lists if needed. You can enter 999 elements into a list if enough
memory is available.

Clearing Data

If a list already has data in it, move the cursor up so that the list name is
highlighted and press ' Í.

Entering Data Directly into a List

Follow the steps below to enter data (such as 400, 455, 390, 450, 360, 320,
480, 480) into a list.
a. Press ... À (
Edit...
b. Enter each number into list
Resetting A List or Recalling a List that follow. After entering each
data value, press Í.When you are finished entering the data, press
y 5. If you wish to add a data value in the middle of the list,
move the cursor to the place of insertion, press y 6, and then enter
the number. To remove an entry from a list, highlight the entry and
press {.

Naming a List

If you name a list, then you can save it for later use. To name a list, highlight the
name of any list, for example
will appear to the left of the list you highlighted. Enter a name for the list, for
example, . (The flashing
YEAR
you want to enter a number as part of the name, you can just enter the list
name.) Press Í and you will see that the list now has a name.
Discovering Algebra Calculator Notes for the
through
L
1
).
. If you do not see list
L
1
, and so on, and press y 6. A new list
,
L L
1 2
tells you that you are in Alpha mode, so unless
A
Texas Instruments TI-84 Plus
. You can create
L
6
, see the sections
L
1
©2014 Kendall Hunt Publishing
(continued)
1