Download Print this page
Safavieh Furniture Varys ACH9501A Quick Start Manual

Safavieh Furniture Varys ACH9501A Quick Start Manual

Advertisement

Quick Links

Page1:
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent.Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
*Please make sure that you have all parts indicated before you begin assambly of this
*This item should be assambled on a soft surface to prevent scratching the finish during
assembly
*This item may require periodic tightening
PIECE
DESCRIPTION
A
B
C
D
Part List
Back
Seat
Seat Rail
Left arm
PICTURE
QUANTITY
1X
1X
1X
1X
F U R N I T U R E
Item# ACH9501A
Product Dimensions:29"WX 35.6"D X 35.4"H
Weight Capacity:275lbs
WARNING:DO NOT STAND ON CHAIR

Advertisement

loading
Need help?

Need help?

Do you have a question about the Varys ACH9501A and is the answer not in the manual?

Questions and answers

Summary of Contents for Safavieh Furniture Varys ACH9501A

  • Page 1 Page1: CARE AND MAINTENANCE Spot clean using a mild water-free solvent.Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. F U R N I T U R E NOTICE *Please make sure that you have all parts indicated before you begin assambly of this *This item should be assambled on a soft surface to prevent scratching the finish during...
  • Page 2 Page2: Right arm Back Cushion Seat Cushion Hardware PIECE DESCRIPTION PICTURE QUANTITY ① Bolt (M6*50MM) ② Allen Key...
  • Page 3 Page3: PREPARATION Before beginning assembly of product,make sure all parts are present.Compare parts with package contents list If any parts is missing or damage,do not attempt to assemble the product. Estimated Assembly Time:20 Minutes. ① ① Step1: Step2: Put the Left leg(D) onto the Seat(B) Position the Back(A) under the assembled Leg(D) and Seat(B) as shown in the picture.
  • Page 4 Page4: Step3: Turn the assambled parts over as the photo. Then put the Right leg(E) onto the Back(A) and Seat(B) Attach them as step1 to step2. Put the Seat Rail(C) between the Left leg(D) and Right leg(E) ① Attach Leg(E) and Leg(D) to Seat rail(C) using Bolts(①), Finally,tighten the Bolts fully in a sequential manner.