4.50 Final Test
Connect equipment and establish settings as shown in Figure 4.
Listen for noise or distortion.
Press the PEAK/RMS switch IN and OUT. Listen for noise.
Press the HARD KNEE/SOFT KNEE switch IN and OUT. Listen for noise.
Press the BYPASS/COMP switch IN and OUT. Listen for noise.
Rotate the THRESHOLD knob CCW. The volume should drop a little. Listen for noise.
Rotate the output knob CW. Volume should increase. Again, listen for noise.
Alesis 3630 Compressor Service Manual 1.00
Figure 4-QC Test Setup
8
12/11/02