Prodipe 5000B User Manual page 3

5000B: Professional Monitoring Headphones
This semi-open studio headset is designed for demanding listening applications and for high
precision monitoring work. Especially created for professional musicians, it's ideal for broadcast,
for work in studio or home-studio. Good noise isolation and a really comfortable listen.
Technical data
• Type: semi open
• Loudhailer: Ø 50mm
• Impédance: 32 Ω
• Sensitivity: 94dB ±3dB
• Frequency Response : 15Hz-28kHz
• Max. Power: 1200mW
• Plug: Jack 3.5mm + adaptateur 6.3mm
• Supplied with x2 straight detachable cables (1,5 M and 3 M) + Case + x2 Extra Ear Pads
(velvet and rubber)
• Weight: 280g (with short cable) / 310g (with long cable)
Instructions for use
1. Put the headphones on and adjust the headband
2. Do not cover the transducers
3. The ear cushions have to be replaced from time to time for reasons of hygiene.
Warning
Hearing Damage. Avoid using headphones with the volume turned up for an extended period of
time. Doing so can damage your hearing. It is advisable to keep the volume at a moderate level at
all times.
Cleaning the headphones
To clean the headphones, use a soft damp cloth. If necessary, the headphones can be cleaned with
soapy water (use a mild detergent such as washing-up liquid).
Never use detergents containing solvents.
Warranty
Prodipe and its distributors decline all responsibility for any damage caused by using this
appliance in a way that does not conform to the conditions of use as set out above.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 3