Table of Contents
Advertisement
3
Shipping, Handling & Storage
3.1
SHIPPING & HANDLING
Transportation and handling of MICRODYN capillary modules should be done with extreme care as a module may crack or break if
dropped. Having proper equipment is also essential for safely handling the modules.
Modules should not come into contact with organic solvents, nor should splicing tape be used as this may lead to the damage of
the module casing.
Wipe the module casing with water or ethanol to remove debris from the module casing.
3.2
STORAGE CONDITIONS
The following conditions are recommended when storing the modules:
•
Store the modules inside a cool building or warehouse out of direct sunlight.
•
Temperature limits: between 5°C and 35°C (41°F and 95°F).
•
Humidity must not exceed 70%.
•
All new modules being stored prior to use should remain in original packaging.
3.3
RETURNING A MODULE
If a module is returned for any reason, MANN+HUMMEL WFS must approve the shipment first. Please contact the appropriate
MANN+HUMMEL WFS representative before sending the product back. Non-approved return shipments will be rejected.
If MANN+HUMMEL WFS approves a return of a module, it must be appropriately cleaned, preserved, packed, and labeled to
transport safely and retain the integrity of the materials.
MICRODYN CAPILLARY MODULES | USER MANUAL
MANN+HUMMEL Water & Fluid Solutions | REVISION DATE: 09/09/2021
6
Advertisement
Table of Contents
