1. System Requirements ...........02 2. Installing Ubuntu Linux .........02 3. Installing CMS software ........05 3.1 Installing CMS from DVD or USB flash drive ..05 3.2 Uploading CMS-SE Installer by SFTP ....06 4. Activating your CMS-SE ........09 5. Online Help ............10...
1. System Requirements OS: Ubuntu 64 bits 16.04 LTS CPU: 2 GHz dual core processor or better RAM: 2 GB system memory HDD or SSD: 50 GB of free hard drive space Installation media: Either a USB flash drive or DVD Network: Highspeed Internet access is essential 2.
Page 4
B. Set up users and passwords: Please DO NOT use administrator, webadmin and smbuser, the reserved accounts of CMS-SE, as the user- name. C. Partition your hard drive: Choose Guided – use entire disk and the installer will guide you through partitioning the hard drive.
Page 5
Install the GRUB boot loader on a hard disk: Select Yes to install it. Step 4 Log in Ubuntu Once the installation is complete, log in Ubuntu with the password cre- ated during the installation process. Please proceed to install CMS Software after you have installed the oper- ating system and logged in Ubuntu successfully.
3.1 Installing CMS from DVD or USB flash drive Step 1 Install CMS software Please insert a flash drive or a disc containing CMS-SE installer into the USB port or the DVD drive. Then, use the following commands to install...
3.2 Uploading CMS-SE Installer by SFTP Step 1 Install SFTP service A. Close apt-daily service $ sudo systemctl stop apt-daily.timer $ sudo systemctl stop apt-daily.service B. Update and install packages $ sudo apt-get update $ sudo apt-get install openssh-server Step 2 Use any SFTP software (e.g. Filezilla or Winscp) to connect to Ubuntu (you must have the IP address) and enter the username and password men- tioned above.
Page 8
Step 3 Upload CMS installation file (I_10.2.17xxx-ubuntu-16.04-amd64.run) to Ubuntu. You can upload the file to any directory but we suggest upload- ing it to your user home folder. NOTE The file name“I_10.2.17xxx-ubuntu-16.04-amd64.run”may be changed due to firmware version change. Step 4 Change the CMS installation file's attribute to 0755. You can either do it on the FTP software or on the command console on Ubuntu.
Page 9
Step 5 Install CMS Software. Open a remote-access program via SSH, such as Putty. Connect to CMS's console remotely and use the commands in the instructions below to install CMS software via SFTP: $sudo sh ./I_10.2.17xxx-ubuntu-16.04-amd64.run [sudo] password for your account: <enter your password> Step 6 Press any key to reboot the server after the installation is complete.
4. Activating your CMS-SE Once you are logged in, you will need to activate the software to complete the installation process, otherwise your CMS server can only manage one SMP player. Step 1 Click on the Activate button in System Overview, under System>License.
5. Online Help The CMS-SE User ’ s Guide provides more detailed information of all features. If you have trouble installing Ubuntu Linux either on a physical server or inside a VM (Virtual Machine), please click the link below to read the more detailed instal- lation guide.
Page 14
B. 設定使用者帳號與密碼:請避免將 administrator、webadmin 與 smbuser 設定為此處的使用者名稱,因為這三個帳號為 CMS-SE 軟體裡的 保留帳號。 C. 分割硬碟:選擇 Guided – use entire disk,然後安裝程式會一步步引 導您完成硬碟分割。 D. 設定 tasksel:請選擇第一個選項 - No automatic updates(不要自動 更新)。否則,任何未預期的 Ubuntu 更新都可能導致 CMS-SE 系統錯誤。 E. 選擇軟體: 請選擇安裝 standard system utilities 與 OpenSSH server 這兩種軟體。...
3. 安裝 CMS 軟體 您可以選擇下列二種方式之一安裝 CMS 軟體,請依相對應的步驟進行安裝。 3.1 由 DVD 光碟或 USB 隨身碟安裝 CMS 步驟 1 先插入含 CMS-SE 安裝檔案的 USB 隨身碟或 DVD 光碟,使用下列指令由 DVD 光碟或 USB 隨身碟來安裝 CMS 軟體: $ sudo mkdir /mnt/cmsse [sudo] password for your account: <enter your password>...
Need help?
Do you have a question about the CMS-SE and is the answer not in the manual?
Questions and answers