ELEVATE BC-22-36 Quick Start Manual

Stainless Steel Burn Cage
Instructions for Part #BC-22-36, BC-22-48
GENERAL GUIDELINES & SAFETY
• It is the user's responsibility to read and follow all
instructions.
• Keep these instructions with the product at all times and
review before each use.
• It is the responsibility of this product's owner to furnish the
instructions to any person that borrows or purchases the
product.
• Inspect the product before use to ensure it is assembled
properly and all parts are in safe working order and free
of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions.
• Please use common sense and practice general safety
measures when using this product.
• Parts and/or instructions are subject to change without
notice.
• Do not touch surfaces while hot.
• For outdoor use only; do not use in a building, garage
or other enclosed area as toxic carbon monoxide fumes
could build up and cause asphyxiation.
• Do not use in or on boats or recreational vehicles.
• Do not use under or near any combustible materials,
including trees or shrubs.
• Do not store combustible materials such as propane or
gasoline anywhere near this product.
• Do not use on wooden decks.
• Do not use in windy conditions.
• Do not allow children to operate.
• Comply with all local, state and national codes; contact
your local fire department if needed.
• Use the same caution as with any open fire.
• Do not leave fire unattended, especially around children
and pets
• Do not move pit until fire, ashes and coals are completely
extinguished.
• To avoid burns, do not touch pit until it has cooled
completely.
021422
TOP X1
SIDE X4
BASE X1
1. Align 2 sides to form a 90° angle,
around the edges of the base.
2. Align corners and insert pin.
3. Repeat process for all sides, creating
a square.
4. Place the top on the burn cage when
burning to prevent embers from
escaping.
1-888-651-3431
PIN X4
Page 1