Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Fraser EX715
- Page 1 OPERATING INSTRUCTIONS EX715 STATIC METER...
-
Page 3: Table Of Contents
Contents Page Introduction Checking on Delivered Equipment Characteristics of the Electric Field Operating Instructions Health & Safety ATEX/IECx Operating Conditions Maintenance Calibration EX715 Iss.4... -
Page 4: Introduction
1. Introduction The EX715 Static Meter has been designed for the analysis of industrial static electricity problems. It has been certified for use in some hazardous areas. It is important that the instrument is used correctly. Please read the following operating instructions before use. -
Page 5: Checking On Delivered Equipment
If there is visible damage contact the factory or one of our distributors immediately. Check that the parts which have been delivered are the same as you have ordered. Documentation The EX715 comes complete with carry case, Declaration of Conformity and Calibration Certificate. EX715 Iss.4... -
Page 6: Characteristics Of The Electric Field
Hold EX715 in the palm of hand, point it away from the charge and click the button once to turn ON. This sets the zero level for readings, so it must be pointing away from the charge when the button is clicked. -
Page 7: Operating Instructions
Hold EX715 in the palm of hand, point it away from the charge and click the button once to turn ON. This sets the zero level for readings, so it must be pointing away from the charge when the button is clicked. - Page 8 & gravure printing etc. and severe dust attraction The EX715 measures the surface voltage in V or kV. A common question is “What is the relationship between surface voltage and field strength?” The relationship is:...
-
Page 9: Health & Safety
5. Health & Safety This equipment is only suitable for Zone 1 and 2. WARNING Do not open the EX715 to replace the battery or for any other reason when in a hazardous area. EX715 Iss.4... -
Page 10: Atex/Iecx Operating Conditions
6. ATEX / IECEx Operating Conditions The EX715 has been certified for use in some hazardous areas. This section details the scope of this certification with explanatory notes. Mark of Protection: II 2 G Ex ia IIB T4/T5 II …………... -
Page 11: Maintenance
8. Calibration The EX715 is calibrated as standard using a 150mm x 150mm or other sized plate. If the instrument is used in hazardous areas then we recommend an annual recalibration. If you need further information about static electricity problems, please contact the manufacturers or authorised distributors. - Page 12 For more information about static and to view the full range of our products, please visit www.fraser-antistatic.com Scotts Business Park, Bampton, Devon, GB, EX16 9DN T + 44 (0) 1398 331114 F + 44 (0) 1398 331411 E sales@fraser-antistatic.co.uk W www.fraser-antistatic.com EX715 OI - Iss.4 - EN...
Need help?
Do you have a question about the EX715 and is the answer not in the manual?
Questions and answers