STRAINER PRODUCT MANUAL Thank you very much for choosing the Yoshitake’s product. To ensure the correct and safe use of the product, please read this manual before use. This manual shall be kept with care for future references. The symbols used in this manual have the following meanings.
1. Overview The ST-1 corn-type temporary strainer is widely used for dust removal in various types of pipelines and for flushing at start-up of operation. 2. Features The product is a simple strainer to be placed between the flanges of short pipes.
5. Nominal Size Selection To make the best use of the product and to satisfy the operating requirements to the maximum, take notice of the following. 4.1 Selection of nominal size Select a nominal size of the product equivalent to that of the pipe (nominal pipe size = nominal size of strainer).
6. Precautions for Operation Caution 1. When installing, check the direction of the product. * Setting the product in wrong directions hampers the product from performing as intended. 2. When installing, reserve a space required for maintenance and inspection (cleaning of the screen) so that an operator can pick up the screen from the product.
Fire, flood, earthquake, thunder and other natural disasters. Consumable parts such as O-ring, gasket, diaphragm and etc. Yoshitake is not liable for any damage or loss caused by malfunction or defect of the product. PDD-046f...
Need help?
Do you have a question about the ST-1 and is the answer not in the manual?
Questions and answers