Denon DHT-S516H Owner's Manual page 64

Contents
My speaker won't connect to my network using the audio cable
Make sure your mobile device is connected to your wireless network before setting up your speaker.
0
Alternatively, you can connect your speaker to your network router using the included Ethernet cable. Once connected via
0
Ethernet, the HEOS App should recognize the speaker and you can manually move it to your wireless network using
Settings/My Devices/Device_Name/Advanced/Network Settings.
Music cuts out or delays sometimes
Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may
0
be using most of your bandwidth (especially if they are streaming video).
Make sure your speakers are within range of your wireless network.
0
Make sure your speakers are not located near other electronic devices that could interfere with it's wireless connectivity (like
0
microwave ovens, cordless phones, TVs, etc...).
Setup Use
Solution
Solution
Troubleshooting
64
Status LED Appendix
Refer to Page
Refer to Page
20
21
7
58
58