Advertisement
Aluminium Designer
Fitting Instructions
Please read these instructions and terms and conditions
carefully prior to installation.
Failure to do so may invalidate the warranty.
Drawings
Drawing 1 - Fixing Positions for Brackets
103
103
103
103
width
Pipe Centres
Pipe centres left to right
Pipe centres from wall
Depth from wall
1. Unpack & Inspect
This product should have reached you in perfect condition. Please carefully unpack & inspect this radiator and all fittings. Your point of purchase
must be notified of any shortages or damage within 28 days of delivery. For further information please see terms & conditions on reverse.
ALUMINIUM_DESIGNER
103
width
B
A
=
width plus valves
=
65mm
=
96mm
103
E
D
C
96
65
50
Advertisement
Table of Contents
Related Manuals for Nordic Aluminium Designer
Summary of Contents for Nordic Aluminium Designer
- Page 1 Aluminium Designer Fitting Instructions Please read these instructions and terms and conditions carefully prior to installation. Failure to do so may invalidate the warranty. Drawings Drawing 1 - Fixing Positions for Brackets width width Pipe Centres Pipe centres left to right...
- Page 2 2. Contents 4. Identifying the diverter You will need: You should have: The diverter is marked with a yellow cap and is fitted on the • 1 Radiator • Tape measure radiator. The diverter can be • 4 Bracket Closing Caps •...
Need help?
Do you have a question about the Aluminium Designer and is the answer not in the manual?
Questions and answers