Platinum Tools FC-250 Care & Use

Care & Use of the FC-250 Fiber Optic Cleaner
Safety Precautions
!
The FC250 Cleaner is designed to clean FC/SC/ST connectors only. We are not
liable for damage caused in attempt to apply this device other applications.
Notes on usage
• Do not attempt to disassemble as this can cause damage to the device.
• Do not touch the cleaning thread as this will contaminate it.
• Do not pull the cleaning thread as this can cause damage.
• Do not use this cleaner when the cleaning thread is empty,
as this can cause damage to the fiber optic element.
Notes on storage for extended periods
• Do not expose device to direct sunlight, high temperature or high humidity.
• The cover on the guide cap should always be closed when device is not in use.
Cleaner Life Expectancy
The cleaner operates by advancing a silk thread with each use. The thread spool is visible through the
window in the body of the cleaner on the side opposite the label. The thread is white, the spool is red,
and as the thread is consumed more of the red spool will become visible. When no more white thread is
visible on the spool, the cleaner should be discarded and replaced.
Full
Low
Empty
The window in the body of the cleaner
makes it easy to determine the remaining
life of the device - all red, time to replace
California, USA • 800.749.5783 • 805.384.2777 • info@platinumtools.com • www.platinumtools.com
To clean SC, FC, & ST style ports & connectors
White
White
Red
Red
OK to use
Black tip of cleaner should have
a white line visible in the center
Empty
©2020 Platinum Tools, LLC • rev 10-20
Black
White
Black
Black