Advertisement
Quick Links
Advertisement
Summary of Contents for Floyd Y-Lamp
- Page 1 How to Assemble: The Floor Lamp...
- Page 2 Components Tube (A, B, C) Wire Support Lampshade Light Bulb Bolt Hex Tool Pro Tip: If you’re considering a return, save your packaging!
- Page 3 Step: 1 of 7 Begin by positioning Tube B so the leg portion is facing away from you. Lugs Take Tube C and positition it so it points to the right. Slide the lugs on Tube C up, into the pins on Tube B. Then, take Tube B and position it so it points to the left.
- Page 4 Step: 2 of 7 Once the three tubes are attached correctly, insert the bolt into the bottom three lugs and tighten it with the provided hex tool. Assembly Instructions The Floor Lamp...
- Page 5 Step: 3 of 7 Next, turn the lamp upright so it’s standing and gently push to insert the light bulb. Assembly Instructions The Floor Lamp...
- Page 6 Step: 4 of 7 Attach the Wire Support by sliding one end of the support over the end of Tube A.Then, slide the opposite end over the end of Tube C. The wire should slide onto the tubes just past the notch at each end. It should fit snugly and stand upright on its own.
- Page 7 Step: 5 of 7 Carefully remove the Lampshade from the packaging (located beneath the tubes). Identify the Left and Right side caps on either end of the Lampshade (indicated by L and R stickers). Insert the Left side plastic plug into the end of Tube A.
- Page 8 Step: 6 of 7 Once assembled, gently remove ‘L’ & ‘R’ stickers from the lampshade as well as stickers ‘A’, ‘B’, & ‘C’ from the tubes. Assembly Instructions The Floor Lamp...
- Page 9 Step: 7 of 7 You’re done! Plug in your Floor Lamp and turn it on! Assembly Instructions The Floor Lamp...
-
Page 10: Notes On Use
READ ALL INSTRUCTIONS BEFORE ASSEMBLY & Usage: Cleaning/Care: USE. ADULT ASSEMBLY REQUIRED. KEEP SMALL Remove all packaging before first use. Contact Clean lamp frame with a dry or damp lint free PARTS AND PACKAGING AWAY FROM CHILDREN. with live electrical voltage can cause serious injury cloth.