Husqvarna 596542901 Manual page 8

STEP 2
ATTACH THE CANOPY SKIN (FIG. 1-4)
PARTS NEEDED
M
1
M
Lay the Canopy Skin (M) on a flat
surface with the Rip and Grip Straps
facing up.
4
Starting at the front of the skin, pull the fabric taught and wrap around and over
the Frame End Bar. Firmly press the male and female Rip and Grip Strips together.
Repeat on back End Bar and then both sides.
+
2
A
B
C
Lay the completed Canopy Frame on
top of the Canopy Skin. The Front Side
Bar (B) in the Canopy Frame needs
to be positioned towards the front of
the skin, identified by the Trailering
Warning Label.
Completed canopy frame.
3
front
warning label
The front of the Sun Canopy is identified by the Trailering Warning Label.
8
TOOLS NEEDED
NONE