Download Print this page

3idee VESA xia-1c Assembly Instructions

Download this manual

xia-1c VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following Xiaomi (mi.com) products:

Desktop Monitor 1C.

The VESA adapter allows you to conveniently mount your XIAOMI brand monitor to

a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts for this.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

www.3idee.eu

Page 1 The VESA adapter allows you to conveniently mount your XIAOMI brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts for this. If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels (not included). www.3idee.eu...
Page 2 Assembly instructions Assembly instruction Step 1 Remove the base of your monitor if it is already attached. Step 2 Mount the adapter to the VESA connector of your monitor arm or directly to the wall. (Figure 1) Figure 1 Step 3 Once you have completed the last step, please check if all screws are tightened.
Page 3 Assembly instructions Step 4 Now insert the metal part of the monitor into the VESA adapter with one hand and hold the VESA arm with the other hand. (Figure 3) Please make sure that you secure the monitor well with your hand while it is not fully screwed.
Page 4 We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...