Changing Your Copy Density - QMS SC-200 User Manual

3.4.4 CHANGING YOUR COPY DENSITY

Copy density refers to the degree of darkness which the QMS
SC-200 has reproduced. There are times when your original
is unsatisfactorily darker or lighter. It is of great advantage
to use the density feature to compensate the unsatisfactory
original.
The Operating Steps:
Place your original face down on the document glass.
1.
Press the "Lighter/Darker" button. The Message Window
2.
displays the default degree of darkness.
3. Repress the "Lighter/Darker" button to select one of the
other levels. Or you may press the "s" to increase the
level, press the "t" button to decrease the level.
4. Press the Copy button. Your printout shows the darkness
or brightness has been compensated.
3-10 -