Page 1
INSTALLATION GUIDE SYMPHONY Desk Mount PART A: INSTALL PREPARATION STEP 1: Space horizontal bars (H) with channel facing up Horizontal Bars Vertical Bars End Caps Base Mounts M5 Set Screw 5/16-24 x 2” Bolt 5/16” Washer WARNING: (included) This product can...
Page 2
PART B: ASSEMBLY STEP 3: Insert End caps (E) into channel on horizontal bars (H). Tighten set screws while pushing End cap. Insert vertical bars and end caps Insert Jig K & O Secure corners of Vertical Bars Page 2...
Page 3
PART C: ASSEMBLY & WALL INSTALLATION Secure corners of Vertical Bars Tighten Horizontal Bars Attach Base Mounts Page 3...
(“z”) for hole placement - Recommended Max. 'X': 12 inches - Recommended Max. 'Y': 40 inches Drill 3/8” holes into Table table surface Table Up to 1 3/4” table Table Table top thickness Symphony to table surface Page 4...
Page 5
PART F: Jig O Positioning Jig1 Standard use scheme Jig1 Standard use scheme 13 1/2 inch 13 1/2 inch 23 inch 23 inch 35 inch 35 inch 47 inch 47 inch Recommended but not versions versions versions versions versions versions versions versions required...