Download Print this page

Advertisement

Quick Links

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide
GB3200 (1-1/4" diameter) and GB3800 Series (1-1/2" diameter)
Thank you for purchasing the nie wieder bohren. (German for "no drilling required") heavy duty grab bars. nie wieder
bohren. – Germany is an innovation leader in fastening technology. These bars have been engineered to exceed
ASTM (American Society for Testing and Materials) requirements and offer the ability to mount using the
internationally patented nie wieder bohren. – no drilling required – technology on premium surfaces such as tile,
natural stone, glass and metal. The nie wieder bohren. – no drilling required – adapter system allows for ease of
installation, durability, performance and no holes in the walls! Another advantage of this innovative approach on
fastening technology is that the system can be removed, if needed, with no damage to the surface. Moreover, with an
additional set of adapters, the bar can be re-installed in minutes.
Choosing and Positioning a Wall Mounted Grab Bar
Wall mounted grab bars come in several lengths. Deciding which length to install depends on how the grab bar will be
used. If you are planning to put a main grab bar on the side wall of a bathroom tub enclosure, the National Kitchen
and Bath Association recommends using a grab bar of at least 24 inches. If you also want to add a second grab bar
for further support on the shower head wall, it should be at least 12 inches long. Before deciding whether to install a
grab bar horizontally, diagonally or vertically the following needs to be taken into consideration: Horizontal grab bars
offer better leverage to a person getting up from the bathtub or up and down from a toilet, whereas a grab bar placed
at a 45 degree angle to the toilet or bathtub rim is easier for people of differing heights to reach. Horiztonal grab bars
should be located 33 to 36 inches above the finished floor around toilets, 33 to 36 inches above the floor of the
bathtub and close enough to the shower head wall in order to support a person adjusting water temperature. Vertical
mount is ideally wall mounted on the entrance to the tub and directly under the shower head to assist with safe entry
and to prevent from falling while showering. The nie wieder bohren. grab bars are also ideal to mount directly to the
tub edge to aid children in safe entry and exit from the bathtub.
Note: Failure to follow the instruction sheet completely may result in a product failure and will void the warranty. Please be
sure to carefully read and follow the instructions for optimum results and safety

Advertisement

loading

Summary of Contents for nie wieder bohren GRIPP

  • Page 1 The nie wieder bohren. grab bars are also ideal to mount directly to the tub edge to aid children in safe entry and exit from the bathtub.
  • Page 2 Do not proceed until the surface is completely clean! nie wieder bohren. – no drilling required. - Recommended for Tile, Natural Stone, Concrete, Glass & Metal. This can be used on smooth or textured surfaces.
  • Page 3 Remove the grab bar from the adapters again by removing the screws. If you are mounting horizontally or vertically, remove the screws on the lower end first to prevent potential injury. After removal of all screws, the adapters are now fixed to the wall in the proper location and ready for the adhesive.
  • Page 4: Adapter Removal

    Ø If you have purchased the nie wieder bohren. adapter, be sure to check the stability of the wall prior to mounting. If the existing wall is old or has any visible water damage or weakness, the performance of the grab bar should be affected negatively.
  • Page 5 >What kind of surfaces is the nie wieder bohren. system suitable for? Almost any smooth or rough surface is suitable if it is firm and able to bear the load in question. The nie wieder bohren. system is perfect for high quality materials that one does not want to damage by drilling. Nie wieder bohren. is suitable with ceramic (tiles), stone, marble, granite, glass, concrete, metal, wood and many plastics*.
  • Page 6 >I followed the instructions carefully, but the adapter still fell from the wall. Why did that happen? According to our experience, if the nie wieder bohren. system fails to deliver what we promise, it is usually for one of the three reasons listed below.