Remote Control User Guide
MANUAL HEIGHT ADJUST — After the
AcuPoint
®
Detection has completed its
scan, should you wish to adjust the vertical
massage range differently, press and hold the
arrows to do so.
POWER / RESTORE — Press to activate the
tablet remote. Press again to stop all function
and restore the chair to the upright position.
AUTO — Tap repeatedly to toggle through
the massage programs.
DEMO — Tap to start the Demo program.
POSITION — Press and hold to adjust the
backrest and foot and calf massager positions
to exactly where you need it.
ZEROG
— Tap to recline the chair to the zero
®
gravity position for maximum spinal relief.
ROLLERS — Tap to turn Foot Rollers On/Off.
CLOUD TOUCH INTENSITY — Tap repeatedly
WholeBody
See page 2 to learn more about
the on-screen indicators
HEAT — Tap to turn Heat On/Off.
to adjust the Cloud Touch intensity.
ROVE
®
WIDTH — In manual mode, tap repeatedly to adjust the
massage roller Width (except in Kneading modes).
SPEED — In manual mode, tap repeatedly to adjust the
massage Speed (except in Rolling mode).
CLOUD TOUCH ACCUPRESSURE — In manual
mode, tap repeatedly to toggle through three
Cloud Touch zones (Full, Upper, or Lower).
MANUAL — Tap repeatedly to toggle through
five massage techniques.
PAUSE — Press to pause all functions
immediately. Press again to resume.
DURATION — Tap repeatedly to toggle through
massage timer settings (default is 20 minutes).
RANGE — In manual mode, tap repeatedly
to toggle between a Full, Zone, or Spot
massage Range.
SPOT — When using Spot manual mode, press
and hold to adjust the vertical massage roller
position.