® SWIFT STL524B Desktop Label Printer User’s Manual NOTICE Please read this manual carefully before using the printer! Notice of Safety Be sure to use the power supply provided by our company. Otherwise it may cause damage to the product.
® SWIFT STL524B Desktop Label Printer User’s Manual otherwise the printer may work improperly. Notice of Storing The printer should be stored at a temperature of -20 ° C to 60 ° C and a relative humidity of 10% to 90%.
® SWIFT STL524B Desktop Label Printer User’s Manual STL524B Outer Appearance 1.2 Model Name Model Description Printing Density STL524B USB, Blue Tooth 8dots/mm, 384dots/line Chapter 2 Performance Characteristics 2.1 Printing Specification Printing Method: Thermal line Paper Width: 25mm(Min)---60mm(Max) Printing Width:...
● Paper Loading Method: please refer to details in 3.1.1 Paper Roll Installation. ● Black Mark Location: available(details please see 4.2 pre-printed black mark manual). ● Printing Control Command: ESC/POS compatible command set, CPCL command set, TSC/TSCL command set. (Refer to<STL524B Printer Command Manual >for details).
® SWIFT STL524B Desktop Label Printer User’s Manual ● Power Supply: DV12V±5%, 2A. Chapter 3 Operation Instruction 3.1 Operation steps 3.1.1 Paper loading 1. Open the paper cover and remove the paper shaft 2. Pass the paper shaft through the core of the paper roll, taking care that the thermal side of the paper is facing the print head.
Page 9
® SWIFT STL524B Desktop Label Printer User’s Manual and the error indicator is off. The printer enters the normal working mode. 3.2.2 Self test Close the paper case, press the【FEED】 button, then turn on the power. At this time, the printer will immediately print out the self-test. Parameters in the self-test will be different for different models.
Page 10
® SWIFT STL524B Desktop Label Printer User’s Manual 3.2.5 Printer parameter settings There are two ways to set printer parameters: 1. Use the setting tool on PC to set. 2. Set by button, the specific operation methods are as follows: In the power off state, open the Paper Cover firstly, press the 【FEED】...
3.3.2 USB interface The standard configuration of the STL524B printer is equipped with a standard USB printer cable B-port data cable for connecting the printer to the main device. The printer's USB belongs to the slave device type (DEVICE); the outline and pin definitions...
Page 12
A handheld device with Bluetooth interface, such as laptops, or other information terminals, can drive STL524B printing via the Bluetooth interface. The initial device name is “STL524B BT Printer” and the initial password is “1234”. Users can use <STL524B Setting Tool Software> to modify the device name and password as needed.
STL524B Desktop Label Printer User’s Manual 3.4 Indicator light, buzzer and button operation The STL524B printer has two buttons, a built-in buzzer and two indicators. 【FEED】is the paper feed button. You can use the print command to enable or disable the button switch function. The button control mode is allowed: When in the ticket mode, press the 【FEED】...
® SWIFT STL524B Desktop Label Printer User’s Manual printer applications for STL524B printer users. This manual is available from the company. 4.2 Preprint black mark instructions If the user uses the pre-printed black mark for ticket positioning, the following black mark pre-printing specifications must be observed when printing the black mark, otherwise the black mark may not be recognized by the printer.
Page 15
® SWIFT STL524B Desktop Label Printer User’s Manual roller and cutter with dusting brush.
® SWIFT STL524B Desktop Label Printer User’s Manual Appendix A Setting introduction: Press 【 PAUSE】 button to choose setting,when press it once , the set become the next one and it will print the present set value; use 【FEED】 button to set the set value, when press it once , the set become the next one .After the setting is...