Download Print this page
Itm TM530-050 Operator's Manual

Itm TM530-050 Operator's Manual

Petrol water pumps

Advertisement

Quick Links

PETROL WATER PUMPS
OPERATOR'S MANUAL
MODELS: TM530-050, TM530-080 & TM530-250
TO PREVENT SERIOUS INJURY OR DAMAGE TO YOUR WATER PUMP, READ
!
!
AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE
Ver: 1.3
www.itmtools.com.au

Advertisement

loading
Need help?

Need help?

Do you have a question about the TM530-050 and is the answer not in the manual?

Questions and answers

Summary of Contents for Itm TM530-050

  • Page 1 PETROL WATER PUMPS OPERATOR’S MANUAL MODELS: TM530-050, TM530-080 & TM530-250 TO PREVENT SERIOUS INJURY OR DAMAGE TO YOUR WATER PUMP, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Ver: 1.3 www.itmtools.com.au...
  • Page 2: Table Of Contents

    WATER PUMP OPERATOR’S MANUAL TABLE OF CONTENTS Warranty ........................Product Specifications ..................... Product Diagram ...................... General Safety Rules ....................Getting Started ......................Operation ........................Maintenance ......................Troubleshooting ......................10 LIMITED WARRANTY Industrial Tool & Machinery Sales (hereinafter referred to as ITMS) will, within twelve (12) months from the original date of purchase, repair or replace any goods found to be defective in materials or workmanship.
  • Page 3: Product Specifications

    WATER PUMP OPERATOR’S MANUAL PRODUCT SPECIFICATIONS Thank you for purchasing your ITM Petrol Water Pump. Please read and understand the content of this manual for safety guidelines, start-up, priming, operation, adjustment and maintenance instructions before using this product. Take all possible precautions to protect your own safety and that of the people in the immediate vicinity.
  • Page 4: General Safety Rules

    WATER PUMP OPERATOR’S MANUAL GENERAL SAFETY RULES Before operating, ensure you have read and understood the manual and operational procedures to help reduce the risk of damage to your product as well as potential personal injury. Before operating, perform the pre-operation inspection to make the use of your water pump safe. Under no circumstances should you use your pump for flammable or corrosive liquids (such as petrol or acid).
  • Page 5: Getting Started

    WATER PUMP OPERATOR’S MANUAL damage. 4. Screw in the oil filler cap/dipstick securely. GETTING STARTED CONNECTING WATER INLET HOSE OIL FILLER CAP/DIPSTICK Always use a quality inlet hose with reinforced construction to prevent hose collapse, the hose must be a continuous hose with no joins or kinks and should be fully unrolled.
  • Page 6: Operation

    Do not use a hose smaller than the pump’s suction port size. Minimum hose size: Use a commercially available hose and hose connector with the hose clamp provided the pump. The suction hose must be reinforced with a non-collapsible wall or braided construction. TM530-050 50mm (2”) TM530-250 50mm (2”) Do not use a hose smaller than the pump’s suction port size.
  • Page 7 WATER PUMP OPERATOR’S MANUAL STARTING THE ENGINE STARTING THE WATER PUMP STARTING THE ENGINE Prime the pump (see page 11-13). CAUTION: Improperly maintaining this pump or failing to correct a problem before operation could cause 1. Move the fuel valve lever to the ON position. Prime the pump (see page 11-13).
  • Page 8 Proper storage preparation is essential for keeping your pump troublefree and SLOW SLOW WATER PUMP OPERATOR’S MANUAL looking good. The following steps will help to keep rust and corrosion from impairing your pump’s function and appearance, and will make the engine easier to start when you use the pump again.
  • Page 9: Maintenance

    WATER PUMP OPERATOR’S MANUAL MAINTENANCE To keep the water pump at optimal performance, checking over it periodically and regular maintenance and service will extend it service life. NOTE: Before performing any maintenance to the water pump, ensure the engine is stopped and turned off.
  • Page 10: Troubleshooting

    WATER PUMP OPERATOR’S MANUAL TROUBLE SHOOTING ENGINE Engine Will Not Start Possible Cause Correction Move fuel valve lever to ON Fuel valve OFF. position. Move choke lever to CLOSED 1.Check control positions. Choke open. position unless engine is warm. Ignition switch OFF. Turn ignition switch to ON.
  • Page 11 WATER PUMP OPERATOR’S MANUAL TROUBLE SHOOTING PUMP No Pump Output Possible Cause Correction 1. Check pump chamber. Pump not primed. Prime the pump Hose collapsed, cut or Replace suction hose punctured. Sink the strainer and the end Strainer not completely of a suction hose completely underwater.

This manual is also suitable for:

Tm530-080Tm530-250