Advertisement
Step 3: Nest swing assembly on the swing set or stable structure
Attach whole nest swing only to swing set or stable structure
(not included) (trees not allowed) top bar by screwing the O
ring on the ropes to the U hook. Make sure to follow below
requests on swinging zone for safety purpose:
Make sure that you have a safety clearance of at least 2 m (front and back)beyond the maximum reach of the swing and
make sure the ground is level and shock absorbing (e.g.grass) without any sharp edges or pointed objects,obstacles,
inclines,levels,steps or hard surface (e.g.concrete) etc.
No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences, clotheslines). Obstacles, inclines, levels, steps
or hard surfaces (e.g. concrete) etc.
Clearance to stationary components on the side, such as the swing scaffolding must be at least 40 cm.
Swinging components, such as a neighboring swing must be placed at a distance of at least 60 cm.
Maximum raised height must not exceed 2.5 meters as measured from the ground.
In the mode, the swing must be at least 40 cm and maximally 60 cm from the ground.
1
3
2
4
Advertisement
