Advertisement
RA 400 & 600 CFM DUST COLLECTOR
LARGE CAPACITY DUST COLLECTOR
The Econoline 400 & 600 CFM-C Style Dust Collectors are constructed with a 9" diameter x 24"
height Cartridge Style Dust filter. This filter is 98.98% efficient, filtering .5-micron particles at
1.5:1 air to-cloth-ratio. This unit also features the ability to clean the filter utilizing an air-
actuated vibrator. This vibrator shakes free the dust adhered to the cartridge depositing it into
the units hopper for easy removal. This process allows the dust collector to operate at peak
efficiency, clearing your abrasive blast cabinet of dust for better visibility.
SET-UP AND OPERATING INSTRUCTIONS
READ INSTRUCTIONS COMPLETELY BEFORE USE
1)
Locate the 10-foot section of 4" diameter vacuum hose packed inside of unit.
Connect one end to 4" diameter tube on back or side of blast cabinet (See drawing).
Secure with hose clamp.
2)
Connect opposite end of vacuum hose to the 4" diameter intake tube on the back of
the dust collector (see drawing). Secure with hose clamp.
3)
Plug power cord on dust collector into the receptacle on the blast cabinet's light box
assembly (located on back side). Dust collector will now start when blast cabinet
light is turned on.
4)
Attach airline to ball valve on top of dust collector with quick disconnect (minimum
¼" diameter).
a. This air is used to clean filter by actuating vibrator mounted to filter support plate.
b. This should be done once every hour or each time you finish blasting.
c. Position waste container under unit's trap door; dump waste dust into container by
pushing down on trap door.
INSTRUCTION MANUAL
CARTRIDGE
ECONOLINE ABRASIVE PRODUCTS, INC.
GRAND HAVEN, MI 49417
401 NORTH GRIFFIN
616-846-4150
www.sandblasting.com
Advertisement
Table of Contents
Summary of Contents for Econoline RA 400
- Page 1 CARTRIDGE LARGE CAPACITY DUST COLLECTOR The Econoline 400 & 600 CFM-C Style Dust Collectors are constructed with a 9” diameter x 24” height Cartridge Style Dust filter. This filter is 98.98% efficient, filtering .5-micron particles at 1.5:1 air to-cloth-ratio. This unit also features the ability to clean the filter utilizing an air- actuated vibrator.
- Page 2 PARTS LIST 400 & 600 Cartridge DC PART # DESCRIPTION INFORMATION 4 EACH 411614 S-HOOK Used on spring to secure filter support plate 2 EACH 411601 SPRING Used to secure filter support plate 1 EACH 410111 VIBRATOR Attaches to filter support plate 1 EACH 309201-66 FILTER/VIBRATOR Plate holds vibrator and filter...
- Page 4 ECONOLINE ABRASIVE PRODUCTS GUARANTEES ITS BLAST CABINETS AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF FIVE YEARS FROM THE ESTABLISHED PURCHASE DATE. ECONOLINE WILL REPAIR OR REPLACE, FREE OF CHARGE, ANY DEFECTIVE PARTS DETERMINED TO BE COVERED UNDER THIS WARRANTY BY OUR FACTORY SERVICE PERSONNEL.
Need help?
Do you have a question about the RA 400 and is the answer not in the manual?
Questions and answers