Summary of Contents for Polar King KE2
- Page 1 USER MANUAL KE2 Basic Display KE2 Combo Display KE2 Console/Controller 4424 New Haven Ave. Fort Wayne, IN 46803 Toll-Free: 800.752.7178 Fax: 260.428.2533 Service: 800.223.2017 www.polarking.com (09-22)
- Page 2 This manual is also available online in our resource center. www.polarking.com All diagrams are available in larger format online in our resource center at www.polarking.com — 2 —...
-
Page 3: Table Of Contents
Table of Contents Basic Display Instructions....................4 Description ........................4 Lights and their meaning..................... 4 Getting to Evap OEM Board Set Points and Adjustments .......... 4 Room Temperature and Defrost type ................4 Combo Display Instructions ....................5 Description ........................5 Get to the Set Points from your Web Interface ............ -
Page 4: Basic Display Instructions
Basic Display Instructions Description The KE2 Basic Display, is a small unit on the inside of the box located on the Evaporator. The Basic Display will always display the room temperature. You can also do adjustments to your Evap OEM Board from the Basic Display. -
Page 5: Combo Display Instructions
Combo Display Instructions Description The KE2 Combo Display, located on the front of your Polar King unit, will automatically display the room temperature of your unit. From the Combo Display, you can also access the Set Points of your Evap OEM Board and change settings. All the set points for both the Evap OEM Board and the Combo Display come preprogrammed for you. -
Page 6: Adjustments On Your Combo Display
• On the far right you will find your Combo Display set points. • All Combo Display set points will come preprogrammed. • One you may look into changing would be “Buzzer Mode”. • Buzzer Mode- this set point has three options. •... -
Page 7: Evap Oem Board Changed From Your Combo Display
Evap OEM Board changes from your Combo Display • Press ◄ or ► so you will see “SELECT CONTROLLER” come across your Combo Display. • Then use ▲ or ▼ to select the controller you would like to look at. •... -
Page 8: Management Console Instructions
Show client services. Services • On the left side of your screen, you will see all your KE2 devices that are connected to that EM-Plus (OEM board(s), wireless sensors, EM-Plus). • You will need to make sure for all your devices to click on the 3 of the 4 icons: the check mark, the cloud, the bell, and the pencil. -
Page 9: Access Tab
Access Tab • Under this tab, is where you set up your KE2 Portal (this tab is usually preprogrammed, and you can reach out to Polar King Inc. to get access to the site. • If you wish to have your own site or you already have one and would like to add this, please contact KE2 Tech Support at information@ke2therm.com or call 636-266-0140. -
Page 10: Logs Tab
Logs Tab • Under this tab, you will be able to set up how often your EM-Plus logs on your unit’s data (please note these come preprogrammed at every 10 MIN or 144 logs a day). • Click the check box next to the pencil to save. System Tab •... - Page 11 • Under the “Credentials” section under the “Systems” tab, you will find where you can change your username and password. • Go to the “Manage” section. • In the “User” field, you can type in your new Username. • In the “Pass” field, you can type in your new Password. •...
-
Page 12: Em-Plus Instructions
EM-Plus Instructions How to Connect • Wi-Fi • Open your computer and open your wi-fi settings. • On the list of available wi-fis should be a “KE2EMPlus-#####”. • Type in password provided for you. • Open web browser (ex: Chrome, Safari). •... -
Page 13: Management Console
Once you click on the link, it will have you login (login information should be provided to you). • This is the page where you will be able to edit: Alarms, KE2 Smart Access Portal, Logs, and Network Settings. — 13 —... -
Page 14: Oem Board Instructions
OEM Board Instructions How to Connect • Via EM-Plus • Connect to your EM-Plus. • Go to Management Console. • Under Management Console, your OEM should be towards the top of your screen. • Click the IP address. • Via Ethernet wire •... - Page 15 • Go to control panel. • Network and Sharing Center. — 15 —...
- Page 16 • Change adapter settings. • Right Click “Ethernet” and scroll down “Properties”. — 16 —...
- Page 17 • Double Click Internet Protocol Version 4 (TCP/IPv4). • Change IP address to match the first 3 sections of the IP address of your OEM Board. • Ex: OEM IP- 10.10.166.211. • Your IP- 10.10.166.202. • Change your Subnet mask to 255.0.0.0. •...
-
Page 18: How To Operate Your Oem Board
How to Operate your OEM Board • The opening page will be the Home page. • On the home page in the top left corner, will be three bars. • If you click on the three bars, you will be able to jump around to the other pages. —... - Page 19 • Status page. • The Status page is just a viewing page, you may view • Room Temp. • Coil Temp. • Suction Temp. • Suction Pressure. • Saturation Temp. • Super Heat. • And all other Auxiliary sensors. • Pair Controller/ Combo Display.
- Page 20 It also shows the defrost count of whichever time frame you choose. When done with the KE2 OEM Board, make sure to properly logout of the device before closing the window. — 20 —...
- Page 21 Notes — 21 —...
- Page 22 Notes — 22 —...
- Page 23 Notes — 23 —...
- Page 24 SEAMLESS FIBERGLASS WALK-IN COOLERS & FREEZERS 4424 New Haven Ave. Fort Wayne, IN 46803 Toll-Free: 800.752.7178 Fax: 260.428.2533 Service: 800.223.2017 www.polarking.com — 24 —...
Need help?
Do you have a question about the KE2 and is the answer not in the manual?
Questions and answers