Summary of Contents for Karl Storz IMAGE 1 S H3-Z FI
- Page 1 KARL STORZ IMAGE 1 S H3-Z FI Camera Head Instruction Manual CAUTION: Federal (USA) law restricts this device to sale by or on the order of a licensed physician.
-
Page 3: Table Of Contents
Contents General Information .........4 Illustrated Description.......6 Operating Instructions ......6 Cleaning, Disinfection and Sterilization..9 Pre-Cleaning ..........9 Manual Cleaning........10 Sterilization Instructions......11 Terms and Conditions ......13 Shipping ..........13 Return Policy...........13 Inspection, Preventative Maintenance and Other Services ........15 Training ..........15 Repair Program ........15 Warranty Policy........16 Limitation of Liability .......17 Software Ownership and Licensing ..18... -
Page 4: General Information
Keep Intended Use this manual available for ready reference. The KARL STORZ IMAGE 1 S H3-Z FI Camera Head is intended for use with the KARL STORZ ICG Imaging System for real-time endoscopic visible and near-infrared fluo- Warnings and precautions rescence imaging. - Page 5 This instruction manual is intended to serve only as a supplement to the KARL STORZ video systems instruction manual. To ensure the safe and efficient use of this KARL STORZ product, read the entire video system instruction manual before connecting the camera system.
-
Page 6: Illustrated Description
Illustrated Description General Information (Continued) Instrument Coupler Focusing Ring Zoom Ring User control button for scrolling (down- wards) through the menu or activating a camera function User control button scrolling (upwards) through the menu or activating a camera function User control button for accessing the menu/making a selection Frequency of the High Definition Operating Instructions... - Page 7 Connecting an Endoscope and Light Cable The H3-Z-FI IMAGE 1 S camera heads each have an integrated instrument coupler and optics. To connect a telescope, turn the outer ring of the instrument coupler clockwise and insert the eyepiece of the endoscope into the coupler.
- Page 8 Technical Description Operating Instructions (Continued) TH102 H3-Z-FI IMAGE 1 S Camera Head Image Sensor 3 x 1/3” Image Format 16:9 1920 x 1080p Pixels 2073600 pixels 1.17 lux (50/60 Hz) Image Refresh Rate 1.4 lux (60 Hz) 2x optical zoom Focal Length 14.8 –...
-
Page 9: Cleaning, Disinfection And Sterilization
Cleaning, Disinfection and Sterilization Instructions WARNING: The H3-Z-FI IMAGE1 S camera head is delivered non-sterile and must be cleaned and sterilized per validated proce- dures prior to initial and subsequent uses. Caution: Do not pick up the camera head by its cable. Always pick up the camera head first, followed by the cable and connector. -
Page 10: Manual Cleaning
Cleaning, Disinfection and Sterilization Instructions (Continued) Note: If immediate cleaning is not feasible, place the camera head in a container and soak for no longer than 30 minutes in a diluted neutral/mild pH enzymatic cleaning Manual Cleaning solution (e.g. Enzol). Recommended Water Quality: Utility Water Caution: WEAR PROTECTIVE GLOVES, CLOTHING, AND A FACE MASK FOR... - Page 11 Do not use the camera head if it is damaged or is difficult to use. The camera head should be returned to KARL STORZ for repairs or replace- Sterilization ment. WARNING: Before sterilization, the instru-...
-
Page 12: Sterilization Instructions
Cleaning, Disinfection and STERRAD Sterilization Systems Sterilization Instructions (Continued) CAUTION: All instruments must be thor- oughly DRIED before loading into the STERRAD sterilizer. Loads containing moisture may cause a cycle cancellation. CAUTION: Use only FDA-cleared poly- propylene sterilization wraps and/or poly- olefin pouches. -
Page 13: Terms And Conditions
(2) the telephone number and the person- to contact; (3) the applicable P.O. number; (4) the KARL STORZ catalog number and, if applicable, the serial number for each product; and, (5) the reason for the return. - Page 14 Terms and Conditions (Continued) the original invoice or packing slip to ensure prompt issuing of credit. Full credit will only be issued for products that are returned within 30 days of invoice date and so long as such items are unused, in resal- able condition and in their original product container.
-
Page 15: Other Services
All repairs carry a 90 day warranty. Exchange products carry the applicable KARL STORZ product warranty. If the damaged product is not returned within thirty (30) days of receipt of the... -
Page 16: Warranty Policy
Terms and Conditions (Continued) sole discretion, perform minor non warranty repairs without charge. KSEA reserves the right to refuse or return any product sent back without prior authorization of KSEA’s WARRANTY POLICY Customer Support Department. Except as otherwise provided herein and/or by the applicable warranty information for a specific product or type of product, all products are generally warranted to be in... -
Page 17: Limitation Of Liability
KSEA, nullifies and otherwise voids all applicable KARL STORZ warranties. Repair or replacement of a KARL STORZ product shall not extend the term of any applicable warranty. The remedies provided herein are Customer's exclusive remedies under this Warranty LIMITATION OF LIABILITY Policy. -
Page 18: Software Ownership And Licensing
(lost profits), or from any other cause, whatsoever, in connection with or arising from the purchase, sale, lease, rental, installation or use of KARL STORZ prod- ucts, even if KSEA has been advised of the SOME JURISDICTIONS DO NOT ALLOW possibility of such damages. - Page 19 The Software, and all modifications, enhancements and upgrades thereto, will, at all times, remain the property of KARL STORZ or the appli- cable third party. Customer may not dupli- cate, copy, reverse-engineer, de-compile, or disassemble the Software or in any way modify the Software.
- Page 20 KARL STORZ SE & Co. KG Dr.-Karl-Storz-Straße 34 78532 Tuttlingen Postfach 230 78503 Tuttlingen Germany Telefon: +49 (0) 7461 708-0 Telefax: +49 (0) 7461 708-105 Email: info@karlstorz.com Web: www.karlstorz.com IM-000014-2.0 (09/20)