Advertisement
(Fig.10)
1.Remove the metal grease filter.
2.Reassemble the flue cover onto the hood body and
use supplied screws to fix it on the correct position.
Fig.10
Self-clean
Self-clean instruction
This product is equipped with self-clean technology.
The self-clean function will be automatically triggered
after the motor works for 15hours.
User also can tap the self-clean button to trigger the
self-clean function.
The red indicator will start glowing during the cleaning
process.
The time period for Self-clean is 10 to 15 minutes. The
product can be used during self-clean.
M
1. Remove the grease filter by unscrewing 2pcs screws.
This will disengage the filter from the hood. Tilt the filter
downward and remove(Fig.11).
2，Wash the filter, taking care not to bend them. Allow
them to be dry before refitting.
3. To install the grease filter, push filter into position
and release. Rescrew two screws .Make sure the filter
is securely engaged after assembly.
Fig.11
(Fig.12)
1.Extract the guard by levering it off with a small screwdriver
or similar tools.
2.Replace the damaged LED, only use. LED DC12V,2W Max.
Fig.12
WARNING:
1. Always switch off the electrical supply before carrying
out any operation on the appliance.
2. Only a qualified and trained service technician can
undertake the work of bulbs replacement and servicing.
NOTE:We recommend only using lamps of the same
specification as the ones being replaced.
Advertisement
