Table of Contents
Advertisement
5. Reinstall the filter by turning
clockwise along with the buckles of
the unit before twisting shut.
5.3 BRUSH ROLLER CLEANING
1. Twist the button on the electric brush head counterclockwise and pull out the brush
roller.
2. Tilt and shake the brush roller to pour out dirt, then use the brush cleaning tool to
remove any leftover detritus.
3. The brush roller is washable. Before replacing, check that the brush roller is
completely dry.
4. Push in and twist the button clockwise to reinstall the brush roller
6. TROUBLESHOOTING
COMMON TROUBLE
Main unit not working
Weak suction
POSSIBLE CAUSES
•
Low Battery power
•
Suction inlet blocked
•
Dust bin or filters blocked
with dust
•
Rolling brush is jammed with
hair or long straps
6. Reinstall the main body by putting
the hook into the hole. Push from
the rear, stopping when you hear the
mechanism lock.
SOLUTIONS
•
Charge the unit before use
•
Remove blockage in suction inlet
•
Remove the dust inside the bin or
filters
•
Remove hair or long straps from
rolling brush
INSTRUCTION MANUAL • 8
Advertisement
Table of Contents
