Command GPS ELD Quick Start Manual

STOP
WE'RE CONFIDENT WE CAN MAKE IT RIGHT!
If you have any questions or problems with your GPS
tracker, please give us a call before you make a return.
CommandGPS Customer Support
Phone: 1-877-899-2755
Email: support@commandgps.com
Set Up eFleetSuite
A
Select 'Home
Terminals' in the
'ADMIN' dropdown.
B Click 'New.'
C
Fill out the
form, then
click 'Save.'
3
Set up your driver(s). Make sure you have the driver's license number available.
A
Select 'Drivers'
in the 'SETUP'
dropdown.
B
Click 'New.'
D
The system will create a temporary password for the driver. See the Driver's App Guide for details.
Install Your Device
4
You will need your device, the cord, and the tablet. If you have ordered more than one tablet, you may
choose any tablet that you have received, as these have not been paired yet. Begin with the ignition
and the tablet powered off.
J-BUS Devices:
5
Connect the cord
to the device,
then plug the
device into the
J-Bus port.
7
Power on the tablet. The app will automatically start. The tablet will then recognize all devices
within range. The device at the top of the list will be
the one closest to you. Double check by matching
the serial number, then choose the device.
8
Enter your Vehicle ID when prompted to
complete eFleetSuite setup.
9
OBD devices only - A pop-up window
will prompt you to input the current odometer
reading of the vehicle.
Your installation is complete!
C
Your drivers
will use 'Driver
ID' to log in to
the app.
E Complete the
form, then
Make sure to check click 'Save.'
the box to give Web
Access to drivers.
OBD Devices: Connect
the OBD extension
cord to the device,
then plug the device
into the OBDII port.
Per regulation, for the first 10
days the system may not display
available hours on the tablet. The
system is still capturing
information and generating logs,
which are available in the
eFleetSuite portal.