Sony WI-OE600 Help Manual page 87

3.
Turn the housing downward and tap it about 10 times on a dry cloth, etc. to remove any water collected inside.
4.
Leave the headset to dry in room temperature.
If the headset units are charged while they are wet with sweat, etc., the charging ports will corrode. Before charging,
wipe off any moisture with a soft dry cloth and leave to dry in room temperature.
Repairs in case of a malfunction without care are not covered by the free warranty.
If the charging port of the headset gets dirty, wipe it clean with a soft dry cloth.
If the headset is cracked or deformed, refrain from using the headset near water, or contact your nearest Sony
dealer.
5-043-991-11(1) Copyright 2022 Sony Corporation
87