Vestil TDT-100-LD Series Assembly Manual

TDT-100-LD S
Step 1: Fasten the casters (2) to the undercarriage.
[NOTE: Attach casters before attaching undercarriage
to bottom of bin.] Insert the threaded stem of each
caster into the bolt hole in the side rail (of the
undercarriage; then install hex nuts on the ends of the
stems and tighten the nuts against the side rail.
Side rail of undercarriage
Step 3: Attach the wheels to the threaded posts
of the undercarriage. Secure each wheel to a
post with a hex nut.
Copyright 2014 Vestil Manufacturing Corp.
Rev. 12/15/2014
V
ESTIL
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
M P
ERIES OLDED OLYURETHANE
A M
SSEMBLY ANUAL
Step 2: Fasten the undercarriage to the underside of the
bin at the four locations identified with light-colored arrows
using the large hex head screws provided with the
product. Insert the screws through slots in the crossbars
of the undercarriage
TDT-100-LD, MANUAL.doc
M
ANUFACTURING
Fax: (260) 665-1339
e-mail: sales@vestil.com
B (1
INS YD
Large hex head screw
Undercarriage
C .
ORP
3
)
Tighten hex
nut against
metal hub to
secure wheel
on post
Page 1 of 2