Keyko KT-CA2-2700 Instructions

Model: KT-CA2-2700
Thank you for purchasing this KEYKO product. For safe
and correct use, please read these instructions carefully.
Please keep the instructions for later reference.
Specifications:
KEYKO Model No. KT-CA2-2700
Type QUICK CHARGER
Voltage
AC 100-240V
Input
50-60Hz,8-11VA
DC 1.2V
Output
600mAx2(AA)
380mAx2(AAA)
LED indication
On steady-charging
Dimensions
2.93*2.78*1.08in
Weight
Approx.2.68 oz
KT-AA2700(Typ.2500mAh,min.2400mAh) 1-
2batteries 300min
Battery / Charge time
AAA batteries
(example:Typ800mAh,min.750mAh) 1-2
batteries 170min
Charge time is the time it takes to charge a fully
discharged battery. The charge time will depend on the
remaining charge in the battery and the ambient
temperature.
Parts and usage:
With this charger, you can charge up to 2AA or AAA KEYKO
Ni-MH batteries.
Charge indicator light
‧ Lights up when charging.
‧ Turns off when charging is complete.
‧ AA / AAA (+) contact surface.
‧ AA / AAA (-) contact surface.
Backside:
‧ Plug.
Charging Safety:
Do not charge near hot temperatures like an
electric blanket,stove,near direct sunlight, inside of
a car, or under hot sun,etc.In addition, please do
not cover the charger with a blanket.In such cases,
battery would not be fully charged because the
temperature inside of the charger will become hot,
and the safety protective function will be activated
and stop charging.
Please charge at temperature between 32F to
104F.
Safety issues of charger:
Danger:
Use under the specified voltage
Please use under AC100V or 240V. Otherwise, may cause high
heat,fire breakout,electic shock,or harm to human body.
Warning:
Do not allow metal objects come into contact with charger.
May cause electric shock,excessive heat,or fire.
For safety and to ensure proper use.please supervise
children while handling charger.
Caution:
May deform charger causing high heat, leakage,or explosion.
Do not place heavy objects on top of the charger.Avoid
unstable locations like areas with strong magnetic fields or
dust. May cause excessive heat or fire.
Charger should be used between 32F to 104F.If ambient
temperature is highter, charger may cause the battery to leak
or rupture.
Correctly use"KEYKO" Ni-MH battery:
About Charging
Depending upon storage condition, typically KEYKO does not
need to be recharged for the first time if used within 2years
from the manufactured date.However, there may be a time
when some digital cameras may display the low battery
indicator,in these cases,please recharge.(For the charger-set
,manufacturered date is printed on the package.)
How to charge:
‧ Place batteries.
‧ Swing the plug out as shown on the right. Plug it into AC100-240v
outlet.
‧ Confirm that the indication light turns on.
‧ Do not plug in upside down.If plugged in upside down, it will finish
charging before it is fully charged.
‧ When charging is finished, indicator light will turn off.
‧ Refer to charing chart for typical charge time.
‧ After charging is done, please unplug the charger from the outlet.
‧ Swing plug back into place.