Table of Contents
Advertisement
7. Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the
other end of the USB cable to an appropriate USB port on your device.
Note:
1. The USB downstream port does not provide power while the monitor is switched off.
2. Power output for USB-A：5V/0.9A.
8. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be
of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
Chapter 1 Getting started 1-7
- Quick Links:
- Types of Adjustments
Hide quick links:
Advertisement
Table of Contents
