Advertisement
Quick Links
4F8135
Li-Ion Rapid Battery Charger
Model K8500
User’s Guide
Thank you for purchasing the KODAK Li-Ion Rapid Battery
Charger. The battery needs to be charged before using
and takes approximately 3 hours or less. The battery can
be charged and discharged approximately 300 times.
Additional KODAK Li-Ion Batteries are available from
dealers of Kodak products, or visit
www.kodak.com/go/batteries.
Easy Steps to Charging
1. Verify that you are loading a Li-Ion rechargeable
battery. Do not load other types into the charger.
2. Insert the battery into the charger with the +/–
contacts facing the +/– contact points in the charger.
3. Insert the plug that matches your power type then
plug the charger into a power outlet.
4. Verify that the red charge indicator light on the charger
turns on. If the light does not turn on, verify that the
battery is inserted correctly.
5. Remove the battery and unplug the charger when the
red indicator light turns green. Charging takes
approximately 3 hours or less.
IMPORTANT SAFETY
INSTRUCTIONS—
Save These Instructions
• DANGER—TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
• For connection to a supply not in the U.S.A., use an
attachment plug adapter of the proper configuration
for the power outlet. This battery charger is intended
to be correctly oriented in a vertical or floor mount
position.
CAUTION:
• Charge only compatible Li-Ion rechargeable batteries.
Other types of batteries may burst causing personal
injury and damage.
• Risk of electric shock. Use only in dry locations.
• Do not operate charger if it has been damaged.
• To reduce the risk of electric shock, unplug charger
from outlet before attempting any maintenance or
cleaning.
• Be sure to use charger with correct voltage:
AC 100-240V.
• Do not insert any objects (such as a screwdriver or
metal wires) into the charger.
• Do not modify or disassemble.
• If something appears wrong with the charger and/or
batteries, disconnect from the electric outlet
immediately.
• Keep out of reach of infants. Children may use only
under strict parental supervision.
• Store in a dry, cool place.
Recommended temperature ranges for use:
Li-Ion
To use (discharge) the
32°–122° F (0°–50° C)
batteries
To charge the batteries
32°–95° F (0°–35° C)
To store the batteries
-4°–86° F (-20°–30° C)
Waste Electrical and Electronic
Equipment Labeling
In Europe: For human/environmental
protection, it is your responsibility to
dispose of this equipment at a collection
facility established for this purpose
(separate from municipal waste). For more information,
contact your retailer, collection facility, or appropriate
local authorities; or visit www.kodak.com/go/recycle.
(Product weight: 85 g.)
Made in China for
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Eastman Kodak Company, 2008.
MC/MR/TM: Kodak. 4J8135
www.kodak.com/go/accessories
1
2
3
Compatible with KODAK Li-Ion Rechargeable Digital
Camera Battery KLIC-8000
Regulatory Information
FCC compliance and advisory
Kodak Li-Ion Rapid Battery Charger, Model K8500
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect
the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an
experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components
or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance
with FCC regulation.
Canadian DOC statement
DOC Class B compliance—This Class B digital apparatus complies with Canadian ICES-003.
Observation des normes-Class B—Ce périphérique numérique de la classe B est conforme à la norme NMB-003 du Canada.
Advertisement
